NEW SEARCH NEW SEARCH, STATE - SA
Next
Last
DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
Item Details
Autochair Milford Electric Person Lift
ILC Reference NO 51:20:150
Item sourced from ILC SA database
Short Description
A portable, electrically operated, internally mounted car hoist designed to lift individuals into and out of the front or rear seat of most vehicles. Recommended for the passenger side of the vehicle. The individual is supported by a sling. It can be user or attendant operated.
Price Guide
Refer to supplier information for pricing details.
Features
The hoist is constructed of steel. It features a mounting post which is the only fixture to the vehicle, leaving the footwell area free of obstruction for passengers. It can be removed to be used on the next vehicle, leaving the first vehicle in its original condition.
The lifting arm of the hoist consists of three components - spreader bar, extension bar and hydraulic boom - which can be easily removed when the hoist is not in use. The three separate pivoting points of the lifting arm allow the person to be lifted and easily manoeuvred into the vehicle. The length of the lifting arm can be adjusted to suit all cars and individuals being lifted.
The lifting movement (up and down) is controlled electrically from the car's 12 volt battery. The hoist is controlled by a small, handheld control box on a cord, which can be attached to the hoist using hook and loop fastening. It has two switches, one for ON/OFF and the other for UP/DOWN.
The sideways movement (into and out of the car doorway) and pivoting movements are controlled manually, either directed by the assistant or facilitated by the hoist user themselves. The hoist has three pivot points, enabling good manoeuvrability.
A range of slings are available to cater for all sizes of user up to 110kg. Heavier people can be lifted with a modified hoist.
The hoist needs to be installed by an automotive electrician. It fits all two door and most four door cars. It can be used on the passenger or driver side (or both). It can also be used on back seats in most four door cars.
The hoist can also be used around the home in any place where a mounting bracket can be fitted. When fitted in the home, it can be powered by a small sealed 12 volt battery or transformer taking power from any 3 pin plug. Extra mounting posts can be supplied so that the single hoist can be used in various places.
Dimensions
Weight...................13kg
Load Capacity............110kg
Maximum lift.............400mm(16")
Warranty
12 month guarantee against faulty parts or workmanship.
Standards
For some types of equipment, specific Australian Standards are applicable to the materials used in, and the manufacturing processes applied to products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specified Australian Standards. Purchasers are advised to check with the supplier or manufacturer of an item as to its compliance with the relevant Australian Standard(s).
Place Of Manufacture
England
Supplier Information - click to supplier for contacts details
TECH-ASSIST PRODUCTS ,
KIDMAN PARK, SA
Additional /images
No additional /images apply to this item
First
Next
Last
