username
password
 
login panel
 
  NEW SEARCH   NEW SEARCH, STATE - VIC

Click for Printer Friendly Version of this information.
First    Next page Next   Last

DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.



Item Details

Grassrings

ILC Reference NO 81:43:005
Item sourced from ILC VIC database


Main picture

Factors to Consider
Provides a firmer base under grass on which to propel a manual wheelchair.


Short Description
Grassrings is a product used to reinforce grass surfaces to enable vehicles and wheeled mobility to travel over and park on grass areas. It is an injection moulded plastic structural grid system made from recycled plastic. Grassrings prevent compaction of the root zone of grass to maximise grass development. The base depth of the product varies dependent on whether the main traffic is pedestrian, cars or trucks.


More Details
Method of Use
1. The supplier recommends that a civil or geotechnical engineer be consulted to determine the design requirements for the gravel and sand road base.
2. Remove depth of soil to thickness of road base plus 35mm, level and compact area to the requirements of the engineer.
3. Add non plastic road base (crushed rock) to designed thickness and compact to test requirements. Subject to geotechnical requirements additional base course stability can be achieved by installation of Novagrid Geomesh below the road base material. This is used also to reduce road base depth.
4. Add and spread evenly a thin layer of coarse sand and wash into road base. Alternatively Novatex non woven geotextile membrane can be layed to prevent loss of fines into porous basecourse.
5. Roll out or lay Grassrings onto the prepared base.
6. After laying Grassrings, cut around valve boxes, sprinklers, trees or kerbing using cutting pliers or secateurs. Spread fertilisers over sand.
7. Apply clean sharp sand of suitable growing pH value to fill rings using a large broom to leave the top of the ring exposed, where roll on turf can be added. A further 15mm of top soil is required for seeding and hydro mulching.
8. For quick lawn establishment roll on grass is recommended by the supplier. On warm days the sand should be wet to reduce the temperature and provide a moist base for the grass roots.
9. Compact the lawn with a heavy roller to remove air pockets around the grass roots ensuring that the roots are set into the sand layer in the rings. Water and fertilise to suit weather conditions.

Safety and Maintenance
Refer to supplier/manufacturer manual and instructions for all safety and maintenance details.

Australian Standards
AS/NZS 3661 Slip resistance of pedestrian surfaces.
AS/NZS 3661.1:1993 Requirements.
AS/NZS 3661.2:1994 Guide to the reduction of slip hazards.
For some types of equipment, specific Australian Standards are applicable to the materials used in, and the manufacturing processes applied to products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specified Australian Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with the relevant Australian Standard(s).


Models
Grassrings module


Dimensions
Grassrings module
Overall Width..................................... 500 mm
Overall Depth..................................... From 75 mm to 300 mm
Overall Length.................................... 500 mm
Thickness......................................... 27 mm


Place Of Manufacture
Australia


Supplier Information - click to supplier for contacts details
ACCULINE SURFACE PROTECTION SYSTEMS,   TULLAMARINE, VIC

Additional /images
  
Click Thumbnail to view larger image.

First    Next page Next   Last

page spacer