NEW SEARCH NEW SEARCH, STATE - VIC
Last
DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
Item Details
Endeavour Industries TADVIC Fully Enclosed Bed
ILC Reference NO 21:11:001
Item sourced from ILC VIC database
SHORT DESCRIPTION
A fixed height, single size, wooden bed with a woven mesh surround designed to prevent occupants from falling out of bed or entrapping body parts in bed rails. The mesh is attached to four wooden bedposts. These are hinged to the side to allow the occupant to get in and out of the bed. This hinge mechanism can be locked. It has a foam mattress with a water resistant Mediflex cover as standard. The side of the bed frame is hinged to assist making the bed. Mattress height from the ground can be customised.
PRICE GUIDE
Refer to supplier details for pricing
FEATURES
Frame
The wooden frame is made from pine with a headboard and footboard.
· The bed base is slatted.
· The four legs form upright poles which extend approximately 1200mm above the bed base.
· Mesh is attached to two frames which are attached to the four posts at mattress height and near the top of the posts. The mesh is continuous around the perimeter of the mattress.
· On each side of the mattress are four pieces which press firmly against the sides of the mattress. This holds the mesh against the mattress.
· The bed can be dismantled for transporting.
Materials
Wooden frame is made from pine and finished with a clear satin Estapol. It can be stained to suit other furniture.
· The mesh is of open weave and is fire resistant. It is called Truck Tarp Mesh.
Mattress
The manufacturer recommends certain dimensions for the mattress. This size is important so there is no gap between the mattress and the mattress restraints which may cause entrapment of body parts.
· A foam mattress with a water resistant Mediflex cover is supplied as standard, but other mattress options can be used.
Features
The lower part of the frame with the mesh attached is hinged on one side. This allows it to be lifted providing access on one side for tasks such as transfers or attending to the occupant. When open, there is a prop at each end to hold it open. When lowering the surround, it can be held down and tightened using two sets of buckles with webbing.
· The side part of the frame which surrounds the mattress is hinged to fold down. This allows access to the mattress to make the bed. When up, it can be locked in position using a latch.
Options
The height of the bed can be made to various heights.
· The mesh can be raised or lowered to various heights.
· Mesh can be attached to the top of the bed to fully enclose the occupant.
Safety and Maintenance
Refer to supplier/manufacturer manual and instructions for all safety and maintenance details.
Standards
For some types of equipment, specific standard(s) are applicable to the materials used in and the manufacturing processes applied to and the installation of products. Compliance with relevant standards is indicated by written certification that a product has been tested and assessed as compliant with specific Standards. Purchasers are advised to check with the supplier or manufacturer of an item as to its compliance with the relevant Standard(s).
CONSIDERATIONS FOR USE
This bed is designed to have no entrapment points, hard surfaces or protrusions.
This bed aims to have no features which could be picked at or tampered with by the occupant.
Designed for adults or children.
MODELS/STYLES
Mediflex Mattress
Tadvic Bed
Display Information
ILCVIC may have this item on display. If you want to view or trial this product, please contact ILCVIC on 03-9362 6111 to ensure that it is still on display prior to your visit.
Supplier Information - click to supplier for contacts details
ENDEAVOUR INDUSTRIES PTY LTD,
HALLAM, VIC
Additional /images
Click Thumbnail to view larger image.
First
Prev
Last
