NEW SEARCH NEW SEARCH, STATE - SA
Last
DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
Item Details
Tech-Assist Banana Patient Transfer Board
ILC Reference NO 51:21:005
Item sourced from ILC SA database
Short Description
A PVC shaped board designed to transfer individuals out of the rear seat of vehicles.
Price Guide
Refer to supplier information for pricing details.
Features
The banana board is made from 6mm P.V.C. cut in a curved shape to fit around the car body when the rear door of a vehicle is open.
The board provides a smooth, low resistant path of travel between the rear car seat and a wheelchair so that a dependent or injured person can be slid out from the car seat into the wheelchair without lifting.
A cotton webbing strap with hook and loop fastening can be put around the person's waist to provide extra leverage for the assistants performing the transfer.
The banana board is available with optional grip tape on the base of the board.
Available in two sizes; small and large.
Method Of Use
1) Position wheelchair at 90 degrees to other surface (bed, chair, car)
2) If possible have surfaces at same height
3) Remove arm of wheelchair if possible, (if not, having the chair at less of an angle to other surface will help to get around the arm of wheel of chair. Some models of transfer boards have a cut out to go over the wheel.)
4) Ensure brakes are applied
5) Firmly place end of board under leading thigh, (enough so that the board doesn't slip away when full weight is transferred to board) and the other end securely onto opposing surface making sure the width, at both ends of the board are fully supported, to prevent tipping. (Preferably, boards should be place equally on both surfaces).
6) Slide across board. Transferring is made easier if the client can help as much as possible by using lead arm to push down on board and other arm to push off from chair this also helps to stabilize the board.
7) Once transfer is complete board can be removed.
Models
Small
14333S.......Small
14339S.......Small with grip tape on base
Large
14333L.......Large
14339L.......Large with grip tape on base
Dimensions
Small
Length........700mm
Thickness.....6mm
Large
Length........1000mm
Thickness.....6mm
Cleaning Requirements
Clean using a soft cloth with a mild detergent or non-alcoholic based disinfectant.
Standards
For some types of equipment, specific Australian Standards are applicable to the materials used in, and the manufacturing processes applied to products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specified Australian Standards. Purchasers are advised to check with the supplier or manufacturer of an item as to its compliance with the relevant Australian Standard(s).
Place Of Manufacture
South Australia
Display Information
This item is currently on display at the ILC
Supplier Information - click to supplier for contacts details
SUMMIT REHABILITATION SALES AND SERVICE PTY LTD,
EDWARDSTOWN, SA
TECH-ASSIST PRODUCTS ,
KIDMAN PARK, SA
Additional /images
No additional /images apply to this item
First
Prev
Last
