NEW SEARCH NEW SEARCH, STATE - VIC
First Prev Next Last
DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
Item Details
Anywhere Rail 600D-3 Suction Grab Bar
ILC Reference NO 81:71:013
Item sourced from ILC VIC database
Factors to Consider
The suction cup bar is not designed to hold or support full body weight.
Designed to assist natural motion, as when stepping out of a shower.
Always check the attachment and holding condition of the suction cup before every use.
Do not attach to moving surfaces.
Designed to be used only on smooth and non porous surfaces: tile, glass, porcelain, fibreglass.
Not for use on wall board, wood, painted or papered surfaces.
Short Description
The Anywhere Rail UNI 600D-3 Suction Grab Bar comprises of two grab rails and three suction cup pads, one at each end and one in the centre to allow for multi positioning. Designed for use on smooth, air tight, non-porous surfaces. It fastens into place using suction when a lever at each end is pulled. A patented suction indicator changes colour when the rail is correctly attached. Other models of rail are available in the Anywhere Rail range.
More Details
Features
Patented Suction Indicator.
If 'Green' appears a correct attachment has been made.
If 'Red' appears check the mounting surface and re-attach.
Smooth grip.
Plastic cups and metal shaft.
63kg load capacity lateral and vertical and 31kg capacity when angled.
Method of Use
Fitting
1. Clean surface with alcohol wipe and allow to dry.
2. Check the condition of the suction cups.
3. Do not used if damaged, cracked or split.
4. Place the UNI 600D-3 in desired position. Suction cups should lie firmly and completely on a smooth surface.
5. Hold one end and slide the lever with a finger. There should be resistance as the suction cup tightens.
6. Repeat until all suction cups are holding firmly.
Removal
1. Release the lever locker (on top of the lever).
2. If suction remains, gently lift one edge using a finger from the gap which shows "remove" on the cup.
3. Do not use a sharp instrument which may damage the suction cup.
4. Keep the levers in the "unlock" position until next use.
Safety and Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Standards
Some equipment needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. To find out if a product meets Australian
Models
Anywhere Rail 600D-3 Suction Grab Bar
Dimensions
Anywhere Rail 600D-3 Suction Grab Bar
Load Capacity (supplier stated)................... From 31 kg to 63 kg
Place Of Manufacture
Supplier Information - click to supplier for contacts details
DOABILITY ,
KENSINGTON, VIC
Additional /images
No additional /images apply to this item
First
Prev
Next
Last