NEW SEARCH NEW SEARCH, STATE - VIC
Next
Last
DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
Item Details
Patient Care Products Bathtub Grab Bar
ILC Reference NO 81:71:005
Item sourced from ILC VIC database
Factors to Consider
May become unstable if pulled sideways or up.
Short Description
A Taiwanese made white powder coated steel clamp on grab rail that fits at right angles to the edge of a bath. The rail is an inverted U shape with an additional horizontal hand grip. Clamp sections are padded with rubber pads to protect the bath and increase slip resistance. The tightening mechanism is made from stainless steel.
More Details
Installation
Position clamp housing on outside edge of the bath with the adjustable flange inside the bath. Secure the flange to the desired position by turning the centrally located wing nut.
The clamp fits best on flat rimmed baths.
The clamped rail can slip if it is installed back to front on if the rail is pulled on from inside the bath.
Suitable for those who require minimal support whilst stepping in and out of the bath.
Designed to provide support when downwards pressure is placed on it.
Safety and Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Standards
For some types of equipment, specific Standard(s) are applicable to the materials used in, the manufacturing processes applied to and the installation of products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specific Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard (s).
Models
Bathtub Grab Bar
Dimensions
Bathtub Grab Bar
Overall Width..................................... From 200 mm to 280 mm
Internal Width of Base Open....................... From 75 mm to 180 mm
Overall Height (Min).............................. 495 mm
Handle Height..................................... 375 mm
Diameter.......................................... 25 mm
Place Of Manufacture
Taiwan (imported by Patient Care Products)
Supplier Information - click to supplier for contacts details
ABLE MEDICAL HIRE (HEIDELBERG HEIGHTS),
HEIDELBERG HEIGHTS, VIC
ABLE MEDICAL HIRE (SURREY HILLS),
SURREY HILLS, VIC
SIGMA - EXTEND A CARE (ONLY SUPPLIES THROUGH PHARMACIES)(1),
CLAYTON, VIC
STATEWIDE HOME HEALTH CARE (SHHC),
BRIGHTON, VIC
Additional /images
No additional /images apply to this item
First
Prev
Next
Last
