Product Search - Hand Rail Industries Liftaway Grab Rails

Next Last

DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.

Item Details

Hand Rail Industries Liftaway Grab Rails

ILC Reference NO 81:70:018
Item sourced from ILC VIC database

Main picture

Factors to Consider
� Must be mounted to studs in the wall.
� Fixing point for all lift up grab rails need to be 450-460mm from the center of the toilet pan.

Short Description
Stainless steel wall mounted horizontal double grab rails that can be locked in a vertical position when not in use. The model 150 can lock in horizontal and vertical positions. All models consists of two horizontal rails joined at their end and a mounting plate for floor, wall or floor and wall fixings. The rails themselves are available in two diameters, and in satin or polished finishes.

More Details
Models
Type 150 is wall mounted and locks in a vertical and a horizontal position.
Type 126 is wall mounted and locks away in the vertical position only.
Type 126/A is floor mounted and locks away in the vertical position only.
Type 126/B is wall and floor mounted and locks away in the vertical position only. This mounting bracket is not as wide or deep as 126/A.
Toilet roll holders and call buttons can be fitted to all models.

Safety and Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.

Standards
AS 1428.1-2001 General Requirements for Access - New Building Work
For some types of equipment, specific Standard(s) are applicable to the materials used in, the manufacturing processes applied to and the installation of products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specific Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard (s).

Warranty
12 months

Models
Type 126
Type 126/A and B
Type 150
Type 550

Dimensions
Type 126
Overall Length.................................... 800 mm
Overall Height (Min).............................. 800 mm
Diameter.......................................... From 32 mm to 38 mm

Type 126/A and B
Overall Length.................................... 850 mm
Overall Height (Min).............................. 800 mm
Diameter.......................................... From 32 mm to 38 mm

Type 150
Overall Length.................................... 800 mm
Overall Height (Min).............................. 800 mm
Diameter.......................................... From 32 mm to 38 mm

Type 550
Overall Length.................................... 800 mm
Overall Height (Min).............................. 800 mm
Diameter.......................................... From 32 mm to 38 mm

Place Of Manufacture
Handrail Industries (Australia)

Supplier Information - click to supplier for contacts details
HAND RAIL INDUSTRIES,   THOMASTOWN, VIC

Additional /images

Click Thumbnail to view larger image.

First   Prev Next   Last