NEW SEARCH NEW SEARCH, STATE - VIC
Next
Last
DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
Item Details
FM Mattsson Single Lever Ceramic Disc Tap
ILC Reference NO 81:50:011
Item sourced from ILC VIC database
Factors to Consider
Equal mains pressure between 19kpa and 930kpa is required on both the hot and cold water supply for installation to be possible.
Short Description
Lever style mixer tap with single spout. Water flow is regulated and the tap is turned on/off by lightly lifting or lowering the lever. Temperature is controlled by turning the lever through approximately 90 degrees from hot to cold.
More Details
In place of washers the Mattsson taps have ceramic discs which glide easily over each other when the lever is used, requiring minimal effort to operate.
Maximum temperature and water flow can be fixed by adjusting the unit with a screwdriver.
Three spout lengths: 240mm (9 1/4^), 160mm (6 1/4^) and a shorter basin unit.
A wall mounted bath or shower lever unit is also available.
A dishwasher isolator is also available which prevents the possibility of a burnt hose if the dishwasher remains permanently connected.
Available in chrome, white or almond ivory.
Ceramic disc construction is guaranteed for 5 years and allows easy operation
Safety and Maintenance
Refer to manufacturer or supplier manual for all safety and maintenance details.
Standards
For some types of equipment, specific Standard(s) are applicable to the materials used in, the manufacturing processes applied to and the installation of products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specific Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard (s).
Place Of Manufacture
Award Brands Pty Ltd
Supplier Information - click to supplier for contacts details
REECE BATHROOM LIFE,
HEIDELBERG, VIC
TAPWARE CENTRE,
BENTLEIGH, VIC
TRADELINK PLUMBING SUPPLIES CENTRES,
DANDENONG, VIC
Additional /images
Click Thumbnail to view larger image.
First
Prev
Next
Last
