NEW SEARCH NEW SEARCH, STATE - VIC
Next
Last
DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
Item Details
Radio Linked Call Buzzer
ILC Reference NO 61:61:004
Item sourced from ILC VIC database
SHORT DESCRIPTION
The Radio Linked Call Buzzer features a receiver plugged into a power supply, and a transmitter used to attract the attention of a carer in another part of the house. When the button on the transmitter is pressed, or a switch plugged into the side of the transmitter is pressed, the buzzer sounds on the receiver.
PRICE GUIDE
Refer to supplier details for pricing
FEATURES
Features
The receiver must be plugged into a power supply to operate, but may be moved from room to room to suit the needs of the carer.
The receiver has two modes of operation
1. Instant - the buzzer will sound only while the call switch is pressed.
2. Latch - the buzzer will start when the call switch is pressed and keep buzzing until the carer resets it.
The transmitter is portable, about the size of a pack of cards.
The transmitter uses radio signals when pressed to activate the buzzer heard on the receiver, and operates over a distance of up to 100 metres.
Access
To activate the buzzer, two methods of access are available
Push the "press" button on the transmitter unit, which is approximately 15mm x 9mm in size. A muted buzz sound is emitted from the transmitter when the button is pushed, indicating that the signal is sent.
Press a switch plugged into the side of the transmitter unit. Switches are not included with the device.
Installation
No installation is required.
Power Supply
The receiver unit must be plugged into a 240 volt power supply.
The transmitter unit uses a 9 volt battery for operation.
Safety and Maintenance
Refer to manufacturer or supplier manual for details.
Australian Standards
For some types of equipment, specific Australian Standard(s) are applicable to the materials used in the manufacturing and the installation of products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specified Australian Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with the relevant Australian Standard(s).
Warranty
12 months
CONSIDERATIONS FOR USE
A call system accessible to switch users.
Portability of both receiver and transmitter (cordless) units is an advantage for use anywhere in a residence.
MODELS/STYLES
Radio Linked Call Buzzer
Display Information
ILCVIC may have this item on display. If you want to view or trial this product, please contact ILCVIC on 03-9362 6111 to ensure that it is still on display prior to your visit.
Supplier Information - click to supplier for contacts details
TECHNICAL SOLUTIONS,
SILVAN, VIC
Additional /images
Click Thumbnail to view larger image.
First
Prev
Next
Last
