NEW SEARCH NEW SEARCH, STATE - VIC
Next
Last
DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
Item Details
Ibis Car Seat Access System
ILC Reference NO 51:20:001
Item sourced from ILC VIC database
SHORT DESCRIPTION
A floor mounted car hoist suitable for most 4 cylinder, 4WDs, most vans. It lifts an occupant in and out of a car or van on the passenger side, or via the rear or side doors of a van. The boom and spreader bar can be customised to suit different cars and individual requirements. A specialised sling is supplied for use with the hoist. The Ibis can be also be wall mounted for use in houses and caravans.
PRICE GUIDE
Refer to supplier details for pricing
FEATURES
Method of Use
1. Place hoist lift unit on mounting pins.
2. Place boom to mounting pin.
3. Place spreader bar to mounting pin.
4. Fit sling to occupant.
5. Fit sling buckles side and central attachment points.
6. Depressing upper button on controller unit raises occupant.
7. Occupant assists self, or is assisted by carer, to move laterally between wheelchair and car seat.
8. Depressing lower button on controller unit lowers occupant into desired position.
Operation
Lift is powered by a 12 Volt motor, and can be connected to a 12 Volt car battery or to mains power via a 12 Volt/240 transformer.
Lift is connected to car battery by a push-in jack attachment located under the dashboard.
Operation is by a small hand-held control with push buttons for raising and lowering the occupant.
A magnet on the back of the control allows it to be attached to the hoist when both the carer"s hands need to be free.
The sideways movement in and out of the car is done manually by the carer
Installation
The hoist attachment bracket is mounted under the dash, close to the door wall post.
The hoist unit, lift arm, and spreader bar can be lifted off its mounting post when not in use and dis-assemble for transporting.
The lift arm of the hoist is available in a range of lengths to accommodate variations in door aperture and height between car models.
Indoor use
A console is fixed onto the wall where the lift is to be used.
The lift holder on the wall console can be adjusted to different height.
Extensions are available to make it possible for the lift arm to cover a wider area.
Safety and Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Standards
For some types of equipment, specific Australian or other Standard(s) are applicable to the materials used in, the manufacturing processes applied to and the installation of products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specific Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard (s).
Warranty
12 month warranty on all parts.
CONSIDERATIONS FOR USE
On removing the mounting plate and post, no visible traces are normally seen, which is an advantage when the car is re-sold.
MODELS/STYLES
Bracket for indoor use
Ibis 150 for Sedans
Ibis 200 for vans
Ibis hoist
Installation into cars
Installation into vans
Supplier Information - click to supplier for contacts details
HEALTHCARE LIFTING SPECIALISTS,
BAYSWATER NORTH, VIC
PARAMOBILITY,
GALSTON, NSW
Additional /images
Click Thumbnail to view larger image.
First
Prev
Next
Last
