NEW SEARCH NEW SEARCH, STATE - VIC
Next
Last
DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
Item Details
Alrick 8350 Series Bariatric Electric Bed
ILC Reference NO 21:10:085
Item sourced from ILC VIC database
Factors to Consider
Most Alrick beds have an 'arc of lift / horizontal movement' when the bed height is adjusted. The space between the wall, and the bed buffer at the head of the bed, varies (depending on the model) from 10cm at the beds lowest height to 30cm at the beds maximum height adjustment. This means that extra space lengthwise, may have to be considered when selecting the bed for small rooms.
Short Description
An electrically operated, four section bed with position adjustments to the backrest, knee break, bed height, Trendelenberg and reverse Trendelenburg. Suitable for bariatric users. Available in two sizes. A range of options and accessories are available.
Price Guide
Refer to supplier details for pricing.
More Details
Models
1070mm width
1200mm width
Frame
Powder coated steel frame.
Solid sheet metal mattress platform.
Four corner buffers.
Headboard / Footboard
A range of headboards and footboards is available.
Adjustments
Hi-low height adjustment.
Backrest angle.
Knee break position adjustment
Trendelenberg (12 degrees) and reverse Trendelenburg (12 degrees) tilt.
Controls
Hand held on an extendable cord.
Single control piece with flat rectangular push buttons.
Each button has a specific function to adjust the positions of the bed.
Mattress
Various mattress options including convoluted or standard foam.
Covers may include a vapour permeable, breathable, water resistant cover with two way stretch.
Castors
The bed has 200mm solid rubber, central lock castors.
Brakes
Central locking pedal type brake operates on all four castors.
Bed Rails
Side rails are optional and fold down alongside the bed.
Safety Features
Battery back up is available to enable the bed to be operated in the event of power failure.
CPR release.
Power Source
Is through a 240 volt power point.
The power is supplied to the hand piece through a 12 volt transformer.
Motor
Battery back up.
Dismantling
Bed does not dismantle.
Models
Alrick 8350 Series 1070mm
Alrick 8350 Series 1200mm
Options
CPR release
Self help pole
IV pole
Bed extensions (clip on or pull out)
Range of bed rails
Manual or electric leg raise adjustment
Range of head and foot boards
125mm, 150mm castors
Bed mover wheel set (for moving the bed vertically through doorways)
Range of mattresses
Dimensions
Alrick 8350 Series 1070mm
Bed Frame Height.................................. From 500 mm to 750 mm
Weight of User.................................... 300 kg
Length............................................ 2050 mm
Overall Width..................................... 1150 mm
Overall Length.................................... 2230 mm
Castor Diameter................................... 200 mm
Load Capacity (supplier stated)................... 300 kg
Platform Width.................................... 1070 mm
Alrick 8350 Series 1200mm
Bed Frame Height.................................. From 500 mm to 750 mm
Weight of User.................................... 350 kg
Length............................................ 2050 mm
Overall Width..................................... 1280 mm
Overall Length.................................... 2230 mm
Castor Diameter................................... 200 mm
Load Capacity (supplier stated)................... 350 kg
Platform Width.................................... 1200 mm
Warranty
One year
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information on what standards the equipment may need to meet, see www.ilcaustralia.org/explanationofstandards.
Place Of Manufacture
Alrick Manufacturing, NSW (Australia)
Supplier Information - click to supplier for contacts details
ALRICK MANUFACTURING,
LAKE CARGELLIO, NSW
IONA AUSTRALIAN MEDICAL PRODUCTS,
KILSYTH, VIC
Additional /images
No additional /images apply to this item
First
Prev
Next
Last
