NEW SEARCH NEW SEARCH, STATE - TAS
Next
Last
DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
Item Details
Hilite Tactile Ground Surface Indicators
ILC Reference NO 81:44:004
Item sourced from ILC TAS database
Short Description
A range of tactile ground surface indicators including tiles that can be applied to an existing ground surface and tiles that must be set down.
Price Guide
Refer to supplier details for pricing.
More Details
Available in two patterns:
Warning - with raised disks or domes
Directional - with raised lines or ridges
Nitrile Rubber PVC tiles
.Suitable for indoor and outdoor use
. Mainly used on existing surfaces eg existing buildings, footpaths, platforms, walkways
.The tile is adhered to the top of the surface with a self adhesive backing (available without) after cleaning and priming of existing ground surface
. Life expectancy outdoors 7 -10 years or more excluding vandalism
. Available in 4 standard colours: black, yellow , grey or white
PVC tiles
As per Nitrile Rubber tiles, but with reduced life expectancy in outdoor and heavy use applications.
Pre Cast Compressed Stone Tile
. Requires set-down to be flush with surrounding ground surface
concrete or asphalt
. Suitable for wet and dry conditions
. A range of colours available
Models / Styles
1. Nitrile Rubber PVC tiles
2. PVC tiles
3. Pre Cast Compressed Stone Tile
Installation
These tiles must be installed professionally and used only as tactile ground surface indicators. Installation must be in accordance with requirements specified in AS1428.4.
The rubber and PVC tiles are adhered to cleaned and prepared flooring or ground surface.
Installation of the pre-cast or stainless steel tiles requires insetting into flooring.
Dimensions
NITRILE RUBBER TILES
Base thickness....2mm
Dome thickness....4-5mm
Overall width.....300mm
Overall length....300mm
PRE CAST CONCRETE
Overall Width.....300mm
Overall Length....300mm
Base Thickness.....30 or 40mm
Australian and Other Standards
For some types of equipment, specific Australian Standards are applicable to the materials used in, the manufacturing process of and the installation of products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specified Australian Standards. Purchasers are advised to check with the supplier or manufacturer of an item of its compliance with the relevant Australian Standard(s).
Place of Manufacture
All Products & Solutions Pty Ltd (NSW)
Australian Made
Supplier Information - click to supplier for contacts details
GEORGE LOW OF MELBOURNE,
BRAESIDE, VIC
Additional /images
No additional /images apply to this item
First
Prev
Next
Last
