NEW SEARCH NEW SEARCH, STATE - TAS
Next
Last
DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
Item Details
Bellman & Symfon Visit Alerting System
ILC Reference NO 61:60:010
Item sourced from ILC TAS database
Short Description
A wireless alerting system designed for people with a hearing loss to identify sounds such as the doorbell ringing, a baby crying or a smoke alarm. When a transmitter is triggered the receiver alerts the user via vibration, indicator lights and / or extra loud sounds. A range of transmitters and receivers are available. The system can be adapted / customised to suit the needs of the individual.
Price Guide
Refer to supplier details for pricing.
Models / Styles
The user has a choice of a range of receivers, transmitters and accessories.
TRANSMITTERS
1. Doorbell Transmitter - Alerts to an existing mechanical/electrical doorbell and intercom telephones. The transmitter is placed at the door next to the existing doorbell or intercom. The transmitter is activated via a built in microphone and coil. The microphone sensitivity can be adjusted. It transmits a radio signal to the various receivers. No wiring is required. The transmitter is powered by a nine (9) volt battery.
2. Telephone/Multi-Purpose Transmitter - This transmitter has a red button that allows push button operation to transmit a radio signal to a receiver unit. This allows the device to be used as a door alert.
There is also a 3.5mm plug at the side of the unit to plug in external devices. The transmitter is supplied with a telephone intermediate adaptor and cord. This allows the transmitter to be connected to the telephone line. When the telephone rings, the telephone transmitter will send a radio signal to the receiver unit.
In addition other devices that can trigger an alarm can be connected to this unit. These include external push buttons, an entry mat or relay.
3. Baby Cry Transmitter - when the baby cries the transmitter sends a signal to the receiver. It features three levels of sensitivity, as well as an adjustable time delay of 60 seconds and comes with its own stand so that it can be easily positioned. It comes with a small light on the front of the transmitter that flashes so that you can see that it is operating and this light changes colour when the batteries are low.
4. Smoke Alarm Transmitter - A battery operated, ionization type smoke alarm. When smoke is detected, a signal is sent to the receiver, as well as making a loud alarm sound. This detector has a flashing light to indicate normal battery status and sends a warning signal to the receiver when the battery is low.
RECEIVERS
1. The Visit Pager Receiver - Receives radio signals (64 different radio channels) from any of the transmitters. It has individual indicator lights for each of the four transmitters and different vibration patterns to enable you to identify which area is sending the signal. The pager is available in two styles - a flashing and vibrating model and a model especially designed for people with low vision. The pager can be clipped to a belt etc.
The pager is operated by either a rechargeable or alkaline battery. The pager has a low battery warning signal which consists of short vibrations and a flashing light. An optional recharger is available when using rechargeable batteries (see ACCESSORIES for more details).
2. The Visit Portable Receiver - Receives radio signals (64 different radio channels) from the transmitters and alerts with an adjustable audible tone and a flashing, red indicator light for each of the transmitters. There is a volume control to adjust the loudness of the sound. The volume can be adjusted from 0 to 90db SPL. The portable receiver can also be attached to the Bed-Shaker that vibrates to alert when signals are received (see ACCESSORIES for more details).
3. Flash Receiver - A portable strove light that receives signals from all transmitters. The receiver alerts with flashes and different coloured LED light signals according to the settings of the transmitters. It can be connected to mains power at night to recharge its internal battery. This allows it to be placed anywhere in the home during the day. The rear of the unit has an outlet to which a Bed Shaker can be attached (see ACCESSORIES for more details). There is also an outlet for connection to the telephone line.
The unit includes a built in sensor that regulates the number of flashes emitted - twelve (12) during the day and eight (8) at night. When the phone rings, each ring signal will trigger five (5) flashes, day or night. The receiver includes a mounted table stand, internal rechargeable battery and mains power adaptor. A wall bracket to mount the Flash Receiver is available as an accessory.
4. Visit Alarm Clock - Is a white, upright clock with a red stand and buttons that can be set to awaken the sleeping user. In addition, the Visit Alarm Clock can receive radio signals sent via the transmitters. Upon receiving the transmitted signal, the clock has an internal bell that can awaken the user. Different coloured LED lights indicate the transmitter that sent the signal. A Bed Shaker can be attached to provide a vibrating signal for the sleeping user.
The Visit Alarm Clock is mains powered with battery back-up in case of power failure.
ACCESSORIES
1. Pager Charger - charges the visit pager overnight and provides connection for up to two Bed Shakers.
2. Bed Shaker - a white, vibrating pad with a red non-slip cover on both sides, that can be put under a pillow to alert the user of alarms when sleeping. It can be connected directly to the Visit Portable Receiver, Visit Flash Receiver, Visit Alarm Clock and the Visit Charger.
3. Magnetic Switch - The magnetic switch can be connected to the Visit Telephone/Multi-Purpose Transmitter via the 3.5mm socket. The item can be placed on opening devices such as doors and windows. When the magnetic switch is opened, it activated the Telephone/Multi-Purpose Transmitter and alerts the user by any of the Visit Receivers.
4. Door Entering Contact Mat - The device is put under an ordinary mat close to the door entrance and is connected to the Telephone/Multi-Purpose Transmitter. When a person steps on the mat, the transmitter is activated and the user is alerted by any of the Visit Receivers.
5. Wallmount Bracket - This allows the Visit Flash Receiver to be mounted on a wall where it can be seen within the room.
Dimensions
VISIT DOOR TRANSMITTER
Overall Width.......80mm
Overall Height......145mm
Overall Depth.......36mm
Transmitter Range...From 30m
VISIT TELEPHONE/MULTIPURPOSE TRANSMITTER
Overall Width.......60mm
Overall Height......98mm
Overall Depth.......30mm
Transmitter Range...From 30m
VISIT SMOKE ALARM TRANSMITTER
Diameter............128mm
Overall Height......50mm
VISIT BABY-CRY TRANSMITTER
Overall Width.......80mm
Overall Height......145mm
Overall Depth.......36mm
VISIT PORTABLE RECEIVER
Overall Width.......130mm
Overall Height......165mm
Overall Depth.......36mm
Weight..............570g
VISIT PAGER RECEIVER
Overall Width.......57mm
Overall Height......86mm
Overall Depth.......29mm
Weight..............70g
VISIT PAGER CHARGER
Overall Width.......78mm
Overall Height......88mm
Overall Depth.......43mm
VISIT FLASH RECEIVER
Overall Height......70mm
Overall Depth.......140mm
Weight..............350g
VISIT ALARM CLOCK
Overall Width.......110mm
Overall Height......130mm
Overall Depth.......92mm
VISIT BED SHAKER
Overall Width.......88mm
Overall Height......88mm
Overall Depth.......27mm
Cable Length........2000mm
MAGNETIC SWITCH
Overall Width.......25mm
Overall Height......62mm
Overall Depth.......13mm
Cable Length........500mm
DOOR ENTERING CONTACT MAT
Overall Width.......745mm
Overall Height......420mm
Overall Depth.......2mm
Cable Length........2000mm
Guarantee
18 months warranty. Warranty void if leaking batteries damage the equipment.
Australian and Other Standards
Specific Australian Standards or other Standard(s) may be applicable for materials, manufacturing processes, or installation of some types of equipment. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specific Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard(s).
Place of Manufacture
Sweden
Supplier Information - click to supplier for contacts details
DEAFNESS RESOURCES AUSTRALIA - CURRENTLY NOT AVAILABLE,
PARRAMATTA, NSW
TASMANIAN DEAF SOCIETY (NORTH WEST),
BURNIE , TAS
TASMANIAN DEAF SOCIETY (NORTH),
LAUNCESTON, TAS
TASMANIAN DEAF SOCIETY (SOUTH),
CLAREMONT , TAS
WORD OF MOUTH TECHNOLOGY PTY LTD (VIC),
BAYSWATER, VIC
Additional /images
No additional /images apply to this item
First
Next
Last
