NEW SEARCH NEW SEARCH, STATE - TAS
Next
Last
DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
Item Details
Braun Millenium Series Wheelchair Lifts
ILC Reference NO 51:22:160
Item sourced from ILC TAS database
Short Description
A range of hydraulically powered platform lifts, internally mounted and designed to lift a person seated in a wheelchair into and out of a vehicle. Mounts to the side or rear of a van. Two models available in platform widths and floor to ground dimensions.
Price Guide
Refer to supplier details for pricing.
Features
The wheelchair lifts are constructed of powder coated aluminium frame with a mesh lifting platform. The lift has a powered raise / lower and folding / unfolding which can be operated by the occupant or attendant. The lift is powered via the vehicle's battery. In case of power failure the lift features a manually operated lever handle that can raise / lower the lifting platform.
The lifting platform folds up inside the side or rear door whilst travelling.
Bridging feature allows user to board the lifter from a footpath or incline.
CONTROLLER - the control station switch panel has wide paddle type rocker switches which are colour coded and labelled with their performed function. The lift is also equipped for operation by the wheelchair occupant and features a plug in wiring harness to accommodate automatic door operators, remote, third station, or a hand held controls.
DOOR OPERATORS available to automatically open the vehicle doors to allow for use of the lift. Models available to suit side double doors, rear double doors and sliding doors. Structural modification may be required for some vehicles to fit the door operators.
SAFETY FEATURE - the lift has an automatic roll stop which activates prior to lifting the platform. Acts as a barrier when lifting or raising to stop wheelchair from rolling off platform. When on the ground, the roll stop flattens creating a bridge from the platform to the ground.
Options
An optional threshold warning kit is available. When the lift is below vehicle floor level, an audible signal will warn passengers as they approach the open lift doorway.
Models / Styles
LIFT VARIATIONS
Model L955U314248 - Full size van with standard height doors.
Model L955U314652 - Full size van with 1350mm high raised doors.
Model L955U315056 - Full size van with 1425mm high raised doors.
INSTALLATION VARIATIONS
Flat Floor Application - standard model.
Stepwell Application - a conversion of the flat floor application when the lift is installed into a step well on a vehicle. This provides a longer platform length in comparison to the standard model.
Dimensions
Flat Floor Application
Platform width............775mm or 838mm
Platform length..........1050mm
Lift range...............1050mm
Step Well Application
Platform width............775mm
Platform length..........1200mm
Lift range...............1050mm
Guarantee
Three year warranty.
Licence & Insurance Requirements
Any addition / alteration to a car needs to be inspected by The Motor Registry, Transport Tasmania.
Australian and Other Standards
For some types of equipment, specific Australian Standards are applicable to the materials used in, and the manufacturing and installation of products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specified Australian Standards. Purchasers are advised to check with the supplier or manufacturer of an item as to its compliance with the relevant Australian Standard(s).
Place of Manufacture
United States of America
Supplier Information - click to supplier for contacts details
NORDEN BODY WORKS (VIC),
DANDENONG, VIC
VINAKA PTY LTD,
MOONAH, TAS
Additional /images
Click Thumbnail to view larger image.
First
Next
Last
