Product Search - Home Lift Between Floors Passenger Lift

Next Last

DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.

Item Details

Home Lift Between Floors Passenger Lift

ILC Reference NO 44:45:014
Item sourced from ILC TAS database

Passenger Home Lift

Short Description
A lift which is designed to accommodate a person in a wheelchair and a person standing, enabling vertical travel between floors up to 4300mm. A pit is not required for installation. Suitable for residential use.

Price Guide
Refer to supplier details for pricing.

More Details
The lift can be installed through floors or against a major change in level up to 4300mm.
It consists of a lift car which moves through a free standing, purpose built lift surround tower. Several variations of installation can be achieved depending on the structural situation and the individual functional requirements.
A lower floor ramp eliminates the need for a pit to be dug for installation. A 75mm pit may be dug if a ramp is not desired.
The lift can be powered by either domestic single phase power or three phase if available. The manual override can be operated by a lay person.
Rated capacity up to 4 persons.

Features
CONTROLS are constant pressure, large, light touch mushroom push buttons, with call buttons at each level, and a key switch for controlling use.
POWER SOURCE The lift can be powered by either domestic single phase power or three phase if available.
DRIVE SYSTEM is a rotating ball screw driven by an electric brake motor and direct coupled gearbox.
SAFETY FEATURES include safety interlocking, preventing travel unless all doors are both closed and mechanically locked, manual backup lowering in case of mechanical failure, emergency telephone, lighting and alarm in case of power failure, manual lowering
in case of power failure, non slip rubber matting on the car floor and entrance ramp.

Installation
A permit is required prior to installing stair lifts in class 2 - 9 buildings (that is commercial or public buildings). Contact your local council for details.

Dimensions
Overall width..............1310mm
Overall depth..............1520mm
Internal carriage width.....820mm
Internal carriage depth....1400mm
Pit depth required...........75mm
Maximum travel distance....4300mm

Australian and Other Standards
For some types of equipment, specific Australian Standards are applicable to the materials used in, the manufacturing process of and the installation of products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specified Australian Standards. Purchasers are advised to check with the supplier or manufacturer of an item of its compliance with the relevant Australian Standard(s).

Place of Manufacture
New South Wales, Australia.

Supplier Information - click to supplier for contacts details
ACCESS SOLUTIONS,   BLACKMANS BAY, TAS
HOMELIFT PTY. LTD. (NSW),   GUILFORD, NSW

Additional /images
No additional /images apply to this item

First   Prev Next   Last