Product Search - Elex Wheelchair Lifts

Next Last

DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.

Item Details

Elex Wheelchair Lifts

ILC Reference NO 44:45:003
Item sourced from ILC SA database

Short Description
A vertical lift that transports a person, in a wheelchair or standing, between floors up to 12000mm(39') with unlimited stops. Indoor and outdoor applications. Suitable for residential and commercial use. Fully customised.

Price Guide
Refer to supplier information for pricing details.

Features
The lift has a steel, self supporting structure. A pit will need to be dug for installation of up to 250mm(9") deep.
The lift can accommodate four standing people or two standing and a person in a wheelchair.

CONTROLS are single touch push buttons with call stations at each level.

POWER SOURCE is mains power, either three phase or single phase, (with single phase the travel speed will be slower).

DRIVE SYSTEM is hydraulic.

SAFETY FEATURES include slow down limit switch, final limit switch at top and bottom, rupture valve on hydraulics, emergency car light, and it returns to ground level if power fails.

Options
Operating panel design
- Vandal Proof
- Touch Sensitive
- Braille
- Square or Round

A range of doors

A range of car designs and finishes

Models
Fully Automatic has automatic opening and closing sliding doors on the carriage and landing.

Semi Automatic has an automatic opening and closing sliding door on the carriage and a swing opening door on the landing that can be manually or electrically operated.

Standards
Some equipment needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. To find out if a product meets Australian Standards check with the supplier. For products that require testing, look at the Novitatech website: www.novitatech.org.au/content.asp?p=277.

Place Of Manufacture
Italy

Supplier Information - click to supplier for contacts details
JPS LIFTS, STEPNEY, SA

Additional /images
No additional /images apply to this item

First Prev Next Last