NEW SEARCH NEW SEARCH, STATE - QLD
Next
Last
DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
Item Details
ECU TECSOL Radio Linked Call Buzzer with
ILC Reference NO 62:70:048
Item sourced from ILC QLD database
Features
CALL BUZZER TRANSMITTER UNIT: Plugging an external switch into this unit will enable an individual to:
Control a television, computer or other equipment. The ECU output lead must be plugged into the appliance/device. A normal switch press (of short duration) will activate this.
A longer sustained switch press will send an alarm signal to the Receiver Unit which can be plugged into a powerpoint anywhere in the home.
Time delay of alarm is adjustable - typically about 10 seconds
CALL BUZZER RECEIVER UNIT: This units sounds the alarm when it receives the radio signal from the Call Buzzer Transmitter Unit.
The Receiver Unit has two modes of operation:
Instant - The buzzer will sound after the switch is held for the delay time and stop when the switch is released.
Latch - The buzzer will start after the delay time and keep buzzing until the carer resets it.
Short Description
A personal call system consisting of two components - a transmitter unit (with ECU output) and a call buzzer receiver unit. The transmitting unit sends a radio frequency signal to the receiving unit. Short switch activations are passed through the device to control any existing switch operated device. Longer switch activations cause a buzzer to sound from the transmitter at first and then from the receiving unit if sustained for long enough. Only available in one model. Switches not included.
More Details
The Radio Linked Call Buzzer with (ECU) Switch Output System comprises of two parts:
1) Call buzzer transmitter unit (with ECU output)
2) Call buzzer receiver unit
The system uses radio frequency. It can be used to operate an external environmental control unit (ECU) as well as a radio linked Call Buzzer for communication.
The call buzzer transmitter will operate the call buzzer receiver over long distances e.g. up to 100 metres. However, the actual range will be dependent on environmental factors.
Models
Only one model is available.
Options
Multiple transmitters maybe ordered for use with one receiver unit.
Method Of Use
Operated by activating a switch.
Short activations will pass through the device to control an environmental control system that is attached.
Longer activations will activate the call system buzzer.
Dimensions
Receiver Unit
Overall Width..................................... 1480 mm
Overall Length.................................... 78 mm
Overall Height.................................... 29 mm
AC Cable
Length............................................ 1650 mm Attached to Call Buzzer Receiver Unit.
Transmitter Unit (ECU) Switch Output
Overall Width..................................... 158 mm
Overall Length.................................... 84 mm
Overall Height.................................... 29 mm
ECU Output Cable
Length............................................ 1350 mm Attached to Transmitter Unit (ECU) Switch Output
Place Of Manufacture
Victoria, Australia
Warranty
12 months warranty.
Display Item On Loan From
Townsville Display Centre:
LifeTec Queensland has the Radio Linked Call Buzzer with (ECU) Switch Output System (Transmitter and Receiver Units) on display.
Please be aware that this device may be available upon request for an individual consultation. A general consultation fee may be required for this service. Please contact LifeTec Queensland for more details.
Brisbane Display Centre:
Not on display.
Please be aware that to trial some items an individual consult may be required and a fee may be required for this service. Please contact LifeTec Queensland for more details
Standards
For some types of equipment, specific Australian or other Standards are applicable to the materials used in, and the manufacturing and installation of products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specified Australian Standards. Purchasers are advised to check with the supplier or manufacturer of an item as to its compliance with the relevant Standard(s).
Price Guide
Refer to supplier details for pricing.
Display Information
LifeTec may have this item on display. If you want to view or trial this product, please contact LifeTec on 07-3552 9000 to ensure that it is still on display prior to your visit.
Supplier Information - click to supplier for contacts details
TECHNICAL SOLUTIONS AUSTRALIA P/L,
SILVAN, VIC
Additional /images
Click Thumbnail to view larger image.
First
Prev
Next
Last
