NEW SEARCH NEW SEARCH, STATE - QLD
Next
Last
DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
Item Details
Bruno Manual Wheelchair Lifters
ILC Reference NO 51:23:021
Item sourced from ILC QLD database
Short Description
A range of lifters designed to load folding or rigid (AWL-150 model only) manual wheelchairs into a vehicle. The lifters are semi-automated and are powered by the vehicle`s battery. There are two models which can be mounted into the side door or rear door of a sedan, hatchback, station wagon, minivan or full-size van.
Price Guide
Refer to supplier details for pricing.
More Details
CONTROLS: Controls are located on a hand held pendant which is stowed on the inside of the vehicle.
OPERATION: The lifters are powered by the vehicle`s battery. As an option, the lifters can be powered by a power pack which is plugged into the vehicle power outlet.
The lifter automatically raises and lowers the wheelchair. The user must manually tilt and guide the wheelchair into and out of the trunk.
AREAS FOR USE: These lifters are suitable for manual folding wheelchairs weighing up to 25kg. The boot mounted lifter is suitable for most types of vehicles including sedans, station wagons and hatchbacks. The rear and side door mounted models are suitable only for minivans and vans.
Models
Three models are available. These vary in the mounting location as follows:
AWL-150 Rear door mounted
AWL-1600 Side door mounted
Method Of Use
1. Position the vehicle at the rear of side of the car (depending on the model used). Remove the seat and hook the lift claw to the T bar docking device.
2. Push the UP button on the pendant. The lifter will tilt the wheelchair into the horizontal position with the user`s guidance.
3. Continue to push the UP button until the wheelchair is above the trunk opening.
4. Swing the wheelchair above the trunk opening and towards the cavity.
5. push the DOWN button to lower the wheelchair into the trunk and remove the lift claw from the docking device. The lift and wheelchair should both fit in the trunk.
Dimensions
AWL-150
Lift Height....................................... Unknown
Load Capacity (supplier stated)................... 25 kg
AWL-1600
Lift Height....................................... Unknown
Load Capacity (supplier stated)................... 25 kg
Caution
Queensland transport requires that modifications comply with the Australian Design Rules and the QT Code of Practice and that devices are installed to manufacturers instructions. Modifications must be performed by an authorised modifier. Major modifications must be approved by the Queensland transport vehicle safety and operations section or the approved person scheme. Once approved, a certificate of modification will be provided and issued with a modification plate. For further information regarding installation and approval requirements contact your local Queensland Transport customer service centre.
Warranty
Unknown, please contact listed supplier for further details
Licence & Insurance Requirements
To ensure Insurance cover, the vehicle owner should advise their Insurance company of the approved vehicle modifications.
Standards
For some types of equipment, specific Australian Standards are applicable to the materials used in, and the manufacturing and installation of products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specified Australian Standards. Purchasers are advised to check with the supplier or manufacturer of an item as to its compliance with the relevant Australian Standard(s).
Place Of Manufacture
United States of America
Display Item On Loan From
Item on display from Tramanco
Display Information
LifeTec may have this item on display. If you want to view or trial this product, please contact LifeTec on 07-3552 9000 to ensure that it is still on display prior to your visit.
Supplier Information - click to supplier for contacts details
TRAMANCO AUSTRALIA PTY. LTD.,
ROCKLEA, QLD
Additional /images
Click Thumbnail to view larger image.
First
Prev
Next
Last
