NEW SEARCH NEW SEARCH, STATE - QLD
Next
Last
DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
Item Details
Lift `n` Scoot Wheelchair and Scooter Lifter
ILC Reference NO 51:23:020
Item sourced from ILC QLD database
Short Description
A steel frame, vehicle mounted hydraulically operated lifter for a powered wheelchair or scooter. Designed to lift a wheelchair or scooter into the back of a van or station wagon. Available in a range of models.
Price Guide
Price Date: 28/09/2006
Price Guide: $2900 - $4700
More Details
FEATURES: This epoxy coated steel lifter is anchored to the rear floor surface of a van or station wagon. It is suitable for use with most vans and station wagons.
This lifter is installed to connect to the car or van motor and does not require charging.
The lifter attaches to a wheelchair or scooter via two adjustable lifting straps with clasps which attach to anchor points which need to be installed on the wheelchair or scooter.
The controller is located on an extendable cord and features push botton operations for vertical, horitontal, left, right, in and out functions (depending on the model).
METHOD OF USE: 1. Open the rear doors or tail gate to allow access.
2. park wheelchair/scooter as close and parallel to the rear bumper as possible. The direction that it faces will depend if it has to go into the vehicle forwards or backwards.
3. Hold the control panel and swing the Lift `N` Scoot out as far as it will travel by pressing the LEFT button.
4. Lower the arm by pressing the DOWN button so it is close enough to be connected to the lifting points on the wheelchair/scooter and hook up the lifting straps accordingly.
5. Put the wheelchair/scooter into freewheel and disengage manual parking brakes so it can be moved easily by hand. Raise the wheelchair/scooter by pressing the UP button to a point above the rear floor of the vehicle. This may be achieved by using both UP and OUT operations simultaneously.
6. Once at the appropriate height, swing the wheelchair/scooter in to the back of the vehicle by pressing the RIGHT button.
7. Lower and/or retract the Lift `N" Scoot so the weight of the wheelchair/scooter rests on the vehicle floor.
8. Slight manual manoeuvring may be required to push the wheelchair/scooter back far enough to close the rear door (s).
9. Place the controller back in it`s resting place and close the rear door (s).
INSTALLATION: Queensland transport requires that modifications comply with the Australian Design Rules and the QT Code of Practice and that devices are installed to manufacturers instructions. Modifications must be performed by an authorised modifier. Major modifications must be approved by the Queensland transport vehicle safety and operations section or the approved person scheme. Once approved, a certificate of modification will be provided and issued with a modification plate. For further information regarding installation and approval requirements contact your local Queensland Transport customer service centre.
Dimensions
Stage 1 Electric Lift
Load Capacity (supplier stated)................... 120 kg
Stage 2 Electric Lift
Load Capacity (supplier stated)................... 120 kg
Stage 3 Electric Lift
Load Capacity (supplier stated)................... 120 kg
Place Of Manufacture
United Kingdom
Supplier Information - click to supplier for contacts details
Additional /images
Click Thumbnail to view larger image.
First
Prev
Next
Last
