NEW SEARCH NEW SEARCH, STATE - QLD
Last
DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
Item Details
Para-Mobility IBIS Vehicle Hoist
ILC Reference NO 51:20:001
Item sourced from ILC QLD database
Features
MATERIALS: The hoist is made of steel whilst the sling is a heavy duty canvas.
OPERATION: The unit has press button pendant control which can be operated by carer or user.
ADJUSTMENT: The webbing of the slings supplied are lengthy to enable users to adjust on receipt of item.
INSTALLATION: A bracket is mounted on the floor of the car to the underside of the dash. The remainder of the unit is collected in two pieces from the boot and placed onto the bracket. The bracket is positioned near the door pillar on the passenger side. The unit is then plugged into the 12 volt jack ready for operation.
VEHICLES SUITABLE FOR: suitable for access to the front seat of a modern six cylinder car or a two door four cylinder car. Also suits most 4x4 wheel drives and vans and has been used for accessing caravans and boats.
OPTIONS: Push in jack attachment for power from the car battery. Different sizes of harness to suit taller person.
COMMENTS: Adjustable lift arm
Lightweight and portable
Storage in the boot of the car
Slings can be customised to suit the user.
Can not be fitted to vans where the engines are positioned under the passenger seat.
May not be approved by Queensland Transport if the vehicle has an airbag on the passenger side.
Short Description
A powered hoist, mounted inside the front passenger seat, which allows a person to be lifted and transferred from a wheelchair outside a car into the front seat. Can be user or attendant operated. The hoist is able to be removed from the mounting for storage.
More Details
This steel frames hoist consists of a vehicle floor mounted plate with a removable lifting arm. The hoist has three pivot points which allow manoeuvrability from wheelchair into the vehicle seat. The spreader bar has 2 attachment points for the sling. The standard sling surrounds the trunk and upper legs of the user. Slings can be customised.
The hoist lifts and lowers using the hand held controls. The user or attendant must provide manual effort to move in and out of the vehicle. The hand held control is attached to the lifter by an extendable cord. The hoist is suitable for a range of vehicles including sedans, hatch-backs, vans and 4WD's. It is designed for use in the front seat.
Models
Three models available as follows
Ibis 150 - suitable for installation in the front seat of sedan vehicle
Ibis 200 - suitable for installation at side entry of vans or small four wheel drives
Ibis 250 - suitable for installation in higher vehicles such as four wheel drives
Dimensions
Standard
Load Capacity (supplier stated)................... 110 kg
Weight (kg)....................................... 11 kg
Power (volt)...................................... 12 volts
Place Of Manufacture
New South Wales, Australia
Warranty
12 months
Display Item On Loan From
Townsville Display Centre:
LifeTec Queensland has the Para-Mobility IBIS Vehicle Hoist on display from Mobility Modification Services.
Please be aware that to trial some items an individual consult may be required and a fee may be required for this service. Please contact LifeTec Queensland for more details.
Brisbane Display Centre:
Not on display.
Licence & Insurance Requirements
Queensland Transport requires that modifications comply with the Australian Design Rules and the QT Code of Practice and that devices are installed to manufacturer`s instructions. Modifications must be performed by an authorised modifier. Major modifications must be approved by the Queensland transport vehicle safety and operations section or the approved person scheme. Once approved, a certificate of modification will be provided and issued with a modification plate. For further information regarding installation and approval requirements contact your local Queensland Transport customer service centre.
To ensure Insurance cover, the vehicle owner should advise their Insurance company of the approved vehicle modifications.
Standards
Manufactured by PARA-MOBILITY in accordance with Australian Engineering Standards AS3581
Price Guide
Refer to supplier details for pricing.
Display Information
LifeTec may have this item on display. If you want to view or trial this product, please contact LifeTec on 07-3552 9000 to ensure that it is still on display prior to your visit.
Supplier Information - click to supplier for contacts details
KCF RALLYSPORT,
KIPPA-RING, QLD
MOBILITY MODIFICATION SERVICES,
GARBUTT, QLD
PARA-MOBILITY,
GALSTON, NSW
Additional /images
Click Thumbnail to view larger image.
First
Prev
Last
