NEW SEARCH NEW SEARCH, STATE - QLD
Next
Last
DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
Item Details
FloCon Auto Lifter Car Top Hoist
ILC Reference NO 51:20:004
Item sourced from ILC QLD database
Short Description
The auto lifter enables one helper to transfer a person who uses a wheelchair from the wheelchair to the car seat and vice versa. It can be set to give access to the front or back seat of the vehicle. It consists of a section permanently attached to a rack on the roof of the car and a detachable hydraulic assembly.
Price Guide
Refer to supplier details for pricing.
More Details
This steel frames hoist consists of a vehicle roof mounted frame and a detachable jack assembly. The hoist attaches to a sling which is placed under the wheelchair user. The hoist will hydraulically lift the user up and down. Manual force is required to move the person in and out of the vehicle. One sling style and size only is available. The hoist is suitable for most types of vehicles including sedans, wagons, vans and four wheel drives.
Features
MOUNTING: The auto lifter is attached to the gutter mounts of vehicles. For vehicles without gutter mounts, holes need to be drilled into the vehicle roof.
INSTALLATION: See an automotive engineer for assistance with installation.
SLINGS: consists of a strong canvas sling with an integrated cushion. The sling encompasses the trunk and upper legs. The sling is available in two sizes - small and large.
DISMANTLING - the hydraulic jack assembly is removed from the roof of the vehicle during transit.
HYDRAULIC CONTROLS: consist of a jack handle protruding from the roof of the vehicle which is pumped to raise the client. There is a release knob which is turned to lower the person. The system is designed to be used by an attendant. Horizontal movement of hoist is not powered, therefore, the helper may be required to slide the person into the car against gravity if the car was parked on a sideways slope.
PEOPLE USEFUL FOR: People using a wheelchair who are unable to transfer themselves into vehicles and have a person available to assist them. This device removed the requirements for lifting a person in and out of a car.
COMMENTS: When ordering: The make of vehicle needs to be specified to determine the size required. A version for high vehicles such as vans and large 4wd vehicles is available.
Models
2 Models are available - the Standard Lifter and the High Vehicle lifter
Method Of Use
1. Manoeuvre the wheelchair into position underneath the slide bar.
2. Remove the jack section from the boot and slot it into the slide bar on the car roof. Pull down the lifting arm.
3. Fit the hook on the end of the lifting arm to the buckles on the Flexi Seat cushion (sling).
4. Pump the hydraulic jack to lift the person out of the wheelchair.
5. Slide the person sideways and forwards into the vehicle.
6. Release the valve on the jack to slowly lower the person into the vehicle seat
7. Release the hook so that the sling is no longer attached.
8. Remove the jack section and push in and secure the slide bar. Return the jack section to the boot.
Options
Accessories include the sling, jack, Bearings (inner and outer), spreader bar and runner. Some of the accessories are necessary for operation of the lifter (including the jack, sling and bearings)
The sling is available in 2 sizes - small and large.
Dimensions
Standard
Load Capacity (supplier stated)................... 100 kg
Warranty
12 months
Licence & Insurance Requirements
Queensland Transport requires that modifications comply with the Australian Design Rules and the QT Code of Practice and that devices are installed to manufacturer`s instructions. Modifications must be performed by an authorised modifier. Major modifications must be approved by the Queensland transport vehicle safety and operations section or the approved person scheme. Once approved, a certificate of modification will be provided and issued with a modification plate. For further information regarding installation and approval requirements contact your local Queensland Transport customer service centre.
To ensure Insurance cover, the vehicle owner should advise their Insurance company of the approved vehicle modifications.
Standards
For some types of equipment, specific Australian Standards are applicable to the materials used in, and the manufacturing and installation of products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specified Australian Standards. Purchasers are advised to check with the supplier or manufacturer of an item as to its compliance with the relevant Australian Standard(s).
Place Of Manufacture
Victoria, Australia
Display Item On Loan From
Not on display
Supplier Information - click to supplier for contacts details
CURRAN ENGINEERING PTY LTD,
HURSTBRIDGE, VIC
Additional /images
No additional /images apply to this item
First
Next
Last
