NEW SEARCH NEW SEARCH, STATE - QLD
Next
Last
DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
Item Details
Jenx Humphrey Prone Upright Stander
ILC Reference NO 44:54:024
Item sourced from ILC QLD database
Short Description
A prone standing frame designed for children approximately three to seven years. The tilt on the Humphrey frame can be adjusted between vertical and horizontal. The degree of leg abduction can also be adjusted. The Humphrey offers a range of adjustable postural supports including chest pad, side pads, hip and chest straps, knee cups and foot sandals. The stander can be pulled apart for storage or transportation. The stander comes standard with a tray.
Price Guide
Refer to supplier details for pricing.
More Details
MATERIALS OF FRAME
Wooden and aluminium frame
MATERIALS OF SUPPORTS
Supports are covered in vinyl and fabric material
FINISH
Varnish finish on wooden components
CASTORS
Four locking swivel castors.
METHOD OF ADJUSTMENT
HIP AND THORACIC STRAPS:
Adjusts by velcro attachments to secure the user comfortably around the chest and hips.
TILT:
Release the pedal lock then press the foot pedal and guide the frame to the desired tilt. Release the foot pedal and reapply the wooden brake.
CHEST PAD:
Can be adjusted up or down by loosening the wing nuts on the underside of the frame and then moving the pad to the correct position.
SMALL CHEST ROLL:
Loosen the wing nut under the tray.
Move the small roll to the desired position and tighten the nut.
SIDE PADS:
Adjust individually.
Loosen the wing nuts behind each pad and adjust to correct position then tighten the nuts.
TRAY:
Loosen the nuts on the side of the tray.
Adjust the angle as required and tighten the nut.
KNEE CUPS:
Loosen wing nuts on side of cups.
Adjust height and angle and tighten nuts.
LEG LENGTH:
Each leg can be adjusted independently in length and degree of abduction.
To adjust length loosed wing nuts at top or legs, slide leg to desired length and tighten nuts.
SANDALS:
Can be adjusted forwards, backwards and in angle.
Alan key is required to loosed the nuts under the sandals.
Models
Only one model is available.
Dimensions
Jenx Humphrey Prone Stander
Height of User.................................... Unknown
Overall Width..................................... 550 mm
Overall Length.................................... 890 mm
Overall Height.................................... From 1060 mm to 1170 mm
Load Capacity (supplier stated)................... 35 kg
Tilt Angle........................................ From 0 degr to 90 degr
Cleaning Requirements
Refer to Instruction For Use for full details of cleaning requirements.
Do not use organic solvents, dry cleaning fluids, abrasive cleaners or industrial bleaches.
Caution
A safety strap prevents the accidental release of the child from the stander.
Refer to manufacture`s Instructions For Use, for full safety details. Never leave an child unattended in this device.
Warranty
24 months
Maintenance
Daily and monthly checks should be completed.
Refer to manufacturer's Instructions For Use for full details of maintenance requirements.
Standards
For some types of equipment, specific Australian or other Standards are applicable to the materials used in, and the manufacturing and installation of products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specified Australian Standards. Purchasers are advised to check with the supplier or manufacturer of an item as to its compliance with the relevant Standard(s).
Place Of Manufacture
United Kingdom
Display Item On Loan From
Townsville Display Centre:
LifeTec Queensland has the Jenx Humphrey Prone Upright Stander on display from Special Needs Solutions ( A division of Doability).
Please be aware that to trial some items an individual consult may be required and a fee may be required for this service. Please contact LifeTec Queensland for more details.
Brisbane Display Centre:
Not on display.
Please be aware that this device may be available upon request for an individual consultation. A general consultation fee may be required for this service. Please contact LifeTec Queensland for more details.
Display Information
LifeTec may have this item on display. If you want to view or trial this product, please contact LifeTec on 07-3552 9000 to ensure that it is still on display prior to your visit.
Supplier Information - click to supplier for contacts details
SPECIAL NEEDS SOLUTIONS,
SOUTHPORT , QLD
Additional /images
No additional /images apply to this item
First
Prev
Next
Last
