NEW SEARCH NEW SEARCH, STATE - QLD
Next
Last
DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
Item Details
Arjo Sara 3000 Stand Up Hoist
ILC Reference NO 44:23:017
Item sourced from ILC QLD database
Short Description
A mobile, battery powered patient lifter which brings a person from sitting to a supported standing position. The sling attaches to the hoist using keyhole fittings and the mast has two handles designed for the occupant to hold. There are two separate knee supports and a fixed footplate. A range of slings and integrated scales [optional] are available.
Price Guide
Refer to supplier details for pricing.
More Details
MATERIALS: Powder coated steel.
FOOTPLATES: The footplate is fixed with a plastic slip resistant surface and raised edges to the front and sides.
BASE: U- shaped, battery powered width adjustable base.
MAST: It has a single, angled mast to which the battery is attached. The actuator is positioned between the mast and knee pads. Ring- shaped push handles are at the top of the mast.
BOOM: Features a single, angled boom that has two keyhole attachment points for the sling. Two rubber horizontal handles are on either side of the boom for the occupant to place their hands. Alternatively, if the user prefers they can grip the boom in the vertical plane. The boom lifts in an arced plane.
SLINGS: The range of slings are made from a polyester material and are available in the following styles:
1. Toiletting sling which fits under the user`s arms around the lower back. This allows for easy access for toiletting and dressing.
2. Transfer sling which has the thigh supports, to allow the person to be transferred in a sitting position. The sling is attached to the boom through the waist and also the legs.
The range of slings available are padded with two keyhole attachment points, each given two lengths. Padded sections for under the arms. Chest strap has two plastic buckles. Internal surface has a slip resistant material. Available in a range of sizes that are colour coded.
KNEE PAD: The kneepads are padded, slip resistant and contoured. Two separate knee pads allow for movement using a spring mechanism. Individual calf support webbing straps are provided as standard.
CONTROLS: Hand held control on an extendible cord and hook on its rear to position on the frame. Extra push buttons are mounted to the top of the mast to raise and lower the boom. Push buttons on hand held control is standard to raise and lower and optional to widen or narrow the legs.
POWER: Powered by 24V 4Ah battery [two batteries and one charger are supplied]. There is a light indication for level of charge in the battery.
BATTERIES: Battery recharging occurs by removing the battery and connecting it to the separate recharger at a power point.
CASTORS: are dual swivel castors at the front. The rear castors are large, single and lockable.
METHOD OF USE: This stand up lifter is designed to assist with the stand transfer of a person from a seated position to a seated position. They need to have the ability to weight bear to some extent. The use of the underarm torso sling, weight bearing footplate and the contoured knee pad provide the three points of support. The person needs to be able to hold onto the hand grips to assist the standing process.
The raising and lowering and width adjustment of the base is operated electrically through the hand held or mast- mounted controller.
TRANSPORTATION: To dismantle, the base and mast can be split using an allen key.
OPTIONS: Integrated scales.
SAFETY: Emergency cut off switch is red and located at the top of the mast. Automatic safety cut out if lowered onto an obstacle. An emergency lowering device is standard.
WARRANTY: 12 months.
Dimensions
Arjo Sara 3000 Stand Up Hoist
Overall Length of Base............................ 1035 mm
Height of Base.................................... 110 mm
Overall Width of Base Closed...................... 640 mm
Internal Width of Base Open....................... 890 mm
Load Capacity (supplier stated)................... 200 kg
Standards
Specific Australian Standards or other Standard[s] may be applicable for materials, manufacturing processes, or installation of some types of equipment. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specific Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard[s].
Place Of Manufacture
Sweden
Display Item On Loan From
Brisbane Display Centre:
Not on Display.
Please be aware that this device may be available upon request for an individual consultation. A general consultation fee may be required for this service. Please contact LifeTec Queensland for more details.
Townsville Display Centre:
LifeTec Queensland has the Arjo Sara 3000 Stand Up Hoist on display from Arjo Huntleigh.
Please be aware that to trial some items an individual consult may be required and a fee may be required for this service. Please contact LifeTec Queensland for more details.
Display Information
LifeTec may have this item on display. If you want to view or trial this product, please contact LifeTec on 07-3552 9000 to ensure that it is still on display prior to your visit.
Supplier Information - click to supplier for contacts details
ARJOHUNTLEIGH (HEAD OFFICE),
MURARRIE, QLD
Additional /images
Click Thumbnail to view larger image.
First
Prev
Next
Last
