NEW SEARCH NEW SEARCH, STATE - QLD
Next
Last
DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
Item Details
Allegro Alto Lift 200 Mobile Hoist
ILC Reference NO 44:12:001
Item sourced from ILC QLD database
Short Description
A mobile, powered (battery operated) hoist which may be used to lift and transfer a person to and from a bed, chair or the floor. This hoist has options of a spreader bar, tilting frame and/or four point spreader bar. Suitable for domestic or health care facility use. Further options are available.
Price Guide
Refer to supplier details for pricing.
More Details
MATERIALS AND COMPONENTS: This steel framed, epoxy coated hoist has an upright mast, an angled boom with a padded end and a standard (general purpose) spreader bar with two attachment points at each end for the slings. Slings attach to the hoist by loops. A tilting frame and four point spreader bar are also available as an option. The plane of the lift is arced. A rectangular shaped push handle is mounted at the top of the mast. The base is U shaped. The hoist does not dismantle.
CONTROLS: Hand held controls are attached to the base of the mast and are on an extendable cord. There are push buttons to control raise and lower. Opening and closing of the base is also controlled by push buttons on the hand held controller.
CASTORS: swivel castors are 100mm in diameter. The 2 rear castors are lockable.
POWER SOURCE: The hoist is powered by a 240 volt battery. A light on the indicates when the battery power is low. Battery charging is via a separate charger. To charge the battery, remove the battery from the hoist and place in charger. Connect charger to main power via the cord provided.
SAFETY FEATURES: There is an emergency stop button on the battery unit. There is an emergency lowering release handle on the actuator arm.
Features
SLINGS: A range of patient slings in sizes from extra small to XXL are available. Styles include general purpose, general purpose with head support, tilt/pivot, amputee and a junior range of paediatric slings.
The hoist has a "Space Link" connection between the boom and the spreader bar. This allows the patient to be rotated through 360 degrees whilst elevated in the hoist. The manufacturer states that this feature increases the maximum lifting height, enhances floor lift capacity and also optimises patient space (ie reduces the likelihood of patient coming into contact with spreader bar or mast during transfers). This feature is available with both the standard and pivot spreaders.
Models
Only one model is available.
Options
Tilting frame
Weighing unit (scales)
4 point yoke
Dimensions
Standard
Under Bed Clearance............................... 125 mm
Overall Width of Base............................. 645 mm closed
Overall Length of Base............................ 1150 mm
Height of Spreader Bar............................ From 362 mm to 1820 mm
Height............................................ 1350 mm minimum storage height
Internal Width.................................... 578 mm base closed
Height of Base.................................... 125 mm
Overall Width of Base Closed...................... 645 mm
Internal Width of Base Open....................... 1130 mm
Load Capacity (supplier stated)................... 200 kg
Weight (kg)....................................... 43 kg
Caution
It is recommended that prior to using this product, training in manual handling and the correct use of assistive devices should be undertaken.
Warranty
2 years on lifter and accessories
1 year on slings
3 months on battery
Standards
The Hoist has been designed and tested in compliance with the following standards
ASA ISO 10535 - 2002 Hoists for the transfer or disabled persons - Requirements and test methods
For some types of equipment, specific Australian Standards are applicable to the materials used in, and the manufacturing and installation of products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specified Australian Standards. Purchasers are advised to check with the supplier or manufacturer of an item as to its compliance with the relevant Australian Standard(s).
Place Of Manufacture
New South Wales, Australia
Display Item On Loan From
Not on display
Supplier Information - click to supplier for contacts details
ACTIVE MEDICAL SUPPLIES,
CANNON HILL, QLD
Additional /images
No additional /images apply to this item
First
Next
Last
