NEW SEARCH NEW SEARCH, STATE - NSW
First Prev Next Last
DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
Item Details
Excellent Ramp Systems
ILC Reference NO 81:72:006
Item sourced from ILC NSW database
Short Description
Modularly constructed height adjustable ramps and floors that can fit most openings and doorsteps Each module consists of solid one piece polyethylene with a grid of square holes. These are available with or without sloped edges. The modules are interconnected with special plastic fastenings and are assembled in layers until the required height / gradient is achieved.
Price Guide
Approx Price: $0.00
Price Date: 05/02/2009
Contact supplier for pricing
More Details
*They can fit most openings and doorsteps regardless of shape and height differential.
*The gradient can be adjusted precisely to requirements and resting platforms can be incorporated as well.
*The ramps can be fitted with both inward and outward corner modules. This makes it possible to negotiate the ramp from all sides.
*The holes facilitate drainage and are used for the insertion of fastenings.
*No damage is done to existing door trim. Doors still close and both the door frame and threshold step remain intact.
*The system can be used anywhere where a ramped surface is required such as over steps, sliding doors, and shower hobs.
*Can be taken apart and reassembled as many times as desired.
self draining, slip resistant surface
*Can be used in any type of weather
*Withstands temperatures from 140 deg C to +100 deg C
*Also acts as a doormat
*Colourfast and UV resistant
*Individual pieces can be purchased
*Recyclable
*Tolerates all household cleaning solutions
*Colours - grey
Models
Components
. Tile 12503
. Ramps 12505
. Corner Ramp 12507
. Half Tile 12510
. Half Ramps 12511
. Infill Tile 12999
. T Locks 12732
. R Locks 12742
. Mounting Pads 12690
. K Tube 2m (Guard rail with K locks) 17100
Pre Assembled Ramps (see dimensions for sizes)
. Kit 1
. Kit 2
. Kit 3
. Kit 4
Installation
*The pieces are fastened together with three special types of plastic lock using a rubber hammer. They are fixed to the subfloor with screws. Individual modules can be sized to fit using a knife or a normal saw.
*The supplier offers an installation service.
Standards
For some types of equipment, specific Australian or other Standard(s) are applicable to the materials used in, the manufacturing processes applied to and the installation of products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specific Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard (s).
Place Of Manufacture
Denmark
Dimensions
Tile 12503
Overall width 250mm
Overall length 250mm
Overall height 18mm
Ramps 12505
Overall width 250mm
Overall length 140mm
Overall height 18mm
Corner Ramp 12507
Overall width 125mm
Overall length 140mm
Overall height 0-18mm
Half Tile 12510
Overall width 125mm - 250mm
Overall height 18mm
Half Ramps 12511
Overall width 125mm
Overall length 140mm
Overall height 0-18mm
Pre Assembled Ramps
Kit 1
Overall width 750mm
Overall length 250mm
Overall height up to 40mm
Kit 2
Overall width 750mm
Overall length 510mm
Overall height up to 72mm
Kit 3
Overall width 750mm
Overall length 760mm
Overall height up to 115mm
Kit 4
Overall width 750mm
Overall length 1000mm
Overall height up to 150mm
Supplier Information - click to supplier for contacts details
INDOMED,
O'CONNOR, WA
Additional /images
Click Thumbnail to view larger image.
First
Prev
Next
Last