NEW SEARCH NEW SEARCH, STATE - NSW
Next
Last
DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
Item Details
Buyers Guide - Weatherproof Switches
ILC Reference NO 81:61:002
Item sourced from ILC NSW database
Short Description
All wet areas need to be protected by a safety switch, however weatherproof light switches can further reduce the risk of electrocution. Weatherproof light switches are usually designed for outdoors and may consist of a rubber seal either behind the switch button protecting the internal wiring or covering the switch button. Therefore, wet fingers pressing the switch are at less risk.
Weatherproof enclosures or covers for switches and general power outlets (GPOs) are also an option.
There are Australian Standard safety requirements for the location of GPOs and light switches in wet areas.
More Details
POINTS TO CONSIDER
Weatherproof light switches are NOT WATERPROOF and therefore do not eliminate the need for a safety switch. The rubber seal may make the light switch more difficult for people with limited finger dexterity to operate. Weatherproof light switches do not come in rocker style.
When choosing a weatherproof light switch enquire about the level of Ingress Protection (IP) it has. IP rating refers to the level of resistance a fitting has to foreign objects and water. The first digit refers to foreign objects such as dust and the second digit refers to water protection. For example, IP65 would have 'complete protection against entry of dust and protection from a low-pressure jet of water from all practicable directions.' Refer to AS 1939 Supp 1 (1990) for IP ratings.
We are pleased to receive feedback on the information we provide...
If there is something we should add or need to change, please let us know.
These are general suggestions - for further advice, consult an occupational therapist or make an appointment at the ILC.
Factors To Consider
Electricians state that if the water spray from a shower, including hand held showers, can reach a GPO or light switch even with a shower recess barrier in place, the switch should be relocated outside of the bathroom.
Standards
Specific Australian Standards or other Standard(s) may be applicable for materials, manufacturing processes, or installation of some types of equipment. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specific Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard(s).
Refer to AS/NZS 3000:2000 for bathroom zoning, which indicates the safe location of GPOs and light switches.
AS 1939 Supp 1: 1990 refers to Ingress Protection ratings.
Supplier Information - click to supplier for contacts details
CLIPSAL AUSTRALIA PTY LTD,
BANKSTOWN, NSW
HPM INDUSTRIES / LGRAND (MANUF),
WATERLOO, NSW
Additional /images
No additional /images apply to this item
First
Next
Last
