username
password
 
login panel
 
  NEW SEARCH   NEW SEARCH, STATE - NSW

Click for Printer Friendly Version of this information.
First   Prev Previous page  Next page Next   Last

DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.



Item Details

Fog Off Mirror Heating Pads

ILC Reference NO 81:54:010
Item sourced from ILC NSW database


Picture

Short Description
A self adhesive heated mirror pad that is attached by an electrician behind a bathroom mirror and switches on with the bathroom light. It eliminates mist from the viewing area of the mirror. Available in one standard size.

Price Guide
Approx Price: $200.00
Price Date: 06/11/2007
$200 for a heating pad


More Details
. For large mirrors, multiple pads can be fitted
. Standard size of Fog-Off heated mirror pads is 500 mm high x 600 mm wide. The area free of condensation is somewhat larger
. The pad thickness is less the 1mm.
. Pads are supplied with a one metre long 1mm cord (without a plug)
. Standard voltage is 240 volts with a power rating of 60 watts.
. The pad uses less electricity than an extractor fan


Models
One model is available

Installation
. FogOff must be fitted by a licensed electrician to AS3000 Standard and protected by a 5 amp fuse or a circuit breaker.
. The pad should be positioned immediately above the basin, with it lower side located at a minimum height of 1250mm above floor level.
. Being self adhesive it attaches to the back of any framed or unframed mirror and should be mounted not less than 50mm from the edge of the mirror.
. Mirror fixing devices should not touch or pass through the FogOff pad. . Allow 200mm minimum clearance for screw fixing.
. Normally the pad can be connected into the bathroom lighting electrical circuit. Alternatively, it can be connected into the fan circuit or through a separate switch. Fitting must conform to the requirements of the electricity supplier and of relevant government authorities.


Warranty
2 years - provided it is fitted in accordance with the instructions supplied.

Standards
Specific Australian Standards or other Standard(s) may be applicable for materials, manufacturing processes, or installation of some types of equipment. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specific Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard(s).

Place Of Manufacture
Unknown

Dimensions
Overall height  500mm 
Overall width   600mm 


Supplier Information - click to supplier for contacts details
H A COGHILL (FOG OFF),   CAIRNS, QLD

Additional /images
No additional /images apply to this item

First   Prev Previous page  Next page Next   Last

page spacer