NEW SEARCH NEW SEARCH, STATE - NSW
First Prev Next Last
DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
Item Details
Hilite Tactile Ground Surface Indicators
ILC Reference NO 81:44:011
Item sourced from ILC NSW database
Short Description
A range of tactile ground surface indicators including PVC tiles (applied to existing ground surface), pre cast compressed stone tiles (inset) and individual stainless steel dots and directional indicators (applied or rivetted into ground). The range covers products for indoor and / or outdoor use.
Price Guide
Approx Price: $16.00
Price Date: 31/05/2007
PVC Tile
Hazard / Dots $15.50 per tile
Directional / Rows $16.85 per tile
S/steel $5.50 per piece (36 dots per tile)
Rivet dot $6.98 per dot
Pre-cast Compressed stone $16.50 per tile. - NLA
Prices subject to change
More Details
. The range includes:
- PVC formula tiles that can be applied to an existing ground surface - - stainless steel hazard warning domes and directional indicators (raised rows) that are inset into the ground or glued onto the ground.
- pre cast compressed stone tile
. Available in two patterns:
Warning - with raised domes
Directional - with raised rows
PVC Formula tiles
. For indoor and outdoor use
. Mainly used on existing surfaces eg existing buildings, footpaths, platforms, walkways but are also suitable for new surfaces
. Slip resistant surface
. Life expectancy outdoors 10 years or more excluding vandalism
. Available in 4 standard colours: black, yellow , grey or white
Stainless Steel Hazard Warning Dots and Directional Guides
. Stainless steel profiled tactile disks.
. Available as a Hazard Warning Dot with a flat base or a Hazard Rivet Dot with a leg.
. These are individually fixed to the ground surface
. The rivet dots are recommended for floor materials eg tiles, carpets. A bore hole must be made then filled with adhesive).
Pre Cast Compressed Stone Tile
. Need to be inset to be flush with surrounding ground surface
concrete or asphalt
. Suitable for wet and dry conditions
. A range of colours available
Models
1. PVC formula tiles
2. PVC tiles
3. Pre Cast Compressed Stone Tile
Installation
These tiles must be installed professionally and used only as tactile ground surface indicators. Installation must be in accordance with requirements specified in AS1428.4.
. The PVC tiles are adhered to the top of the surface with assorted types of epoxys or adhesives.
. Installation of the pre - cast requires insetting into flooring.
. Installation of stainless steel domes requires either gluing onto the ground or models with rivets (including the directional indicators) are glued into a bored hole the ground. Bore hole 10mm wide and 20mm deep. Manufacturer will provide details of specified placement distances.
Standards
For some types of equipment, specific Australian Standard(s) are applicable to the materials used in, the manufacturing processes applied to and the installation of products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specified Australian Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Australian Standard(s).
Tactile ground surface indicators (TGSI) should comply with the current edition of the Australian Standard AS1428.4 - Design for access and mobility Part 4: Tactile Indicators. This standard provides specifications on the form of TGSI and on their installation. Refer to this standard to determine the luminance contrast required between the TGSI and the surrounding ground surface and for installation details including width, length and location for a wide range of applications.
The Building Code of Australia specifies in what situations TGSI must be installed. To comply with the BCA the installation must be in full compliance with the relevant sections of the current AS1428.4.
ground surface indicators.
This product is manufactured in accordance with AS1428.4 , however appropriate colour choice and correct installation will determine full compliance with AS1428.4..
Nitrile PVC Tiles are manufactured to AS1428.4, NZS / AS1428.4, AS1530.3 and AS1661.1
Pre cast tiles are manufactured to AS1428.4
Place Of Manufacture
All Products & Solutions Pty Ltd (NSW)
Australia
Dimensions
PVC TILES
Base thickness 2mm
Dome thickness 4-5mm
Overall width 300mm
Overall length 300mm
STAINLESS STEEL
Domes
Base diameter 35mm
Top diameter 25m
Dome thickness 5mm
Weight approx 40g
Directional
Base width 35mm
Top width 25mm
Overall thickness 5mm
Overall length 285mm
PRE CAST CONCRETE
Overall Width 300mm
Overall Length 300mm
Base Thickness 30 or 40mm
Display Information
ILCNSW may have this item on display. If you want to view or trial this product, please contact ILCNSW on 02-9890 0940 to ensure that it is still on display prior to your visit.
Supplier Information - click to supplier for contacts details
ALL PRODUCTS & SOLUTIONS,
,
Additional /images
Click Thumbnail to view larger image.
First
Prev
Next
Last