Product Search - Dane Powerpal 3100 Mover

Next Last

DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.

Item Details

Dane Powerpal 3100 Mover

ILC Reference NO 64:35:024
Item sourced from ILC NSW database

Short Description
The Powerpal 3100 is a powerful, compact, electric machine powered by 1 HP motor. It is battery operated and capable of generating 759 inch pounds of torque allowing it to easily push / pull well over 3000 kg. The Powerpal 3100 can operate continuously for 10 hours on a single charge.

Price Guide
Approx Price: $0.00
Price Date: 24/03/2006
POA

More Details
BENEFITS
The Powerpal 3100 increases productivity and decreases injuries involved in transporting wheeled loads around commercial and industrial workplaces.
By mechanizing the process of transporting loads on wheels, a single employee can safely and efficiently transport substantially larger loads.

The automatic brake engages whenever the machine is not in use, ensuring safe operation on slopes. Your speed is controlled by how much you decide to twist the throttle in forward or reverse. The foam filled tyres coupled with an efficient motor generates low decibels and the operator needs no protective hearing gear. An automatic reverse button is located on the tiller to increase safety.

MATERIALS
Drive fully shielded from environmental hazards by steel lower frame.

MOTOR
System drive:
Integral Stature motor drive and axle assembly: 30.87:1 motor to axle shaft ratio.
1.1 HP continuous load
Full differential wheel drive system.

BATTERIES
Operating voltage:
36-volts D.C.: three 12-volt batteries, Trojan SCS225, 225 minute reserve capacity.
Battery level charge indicator: 10%-100% (with LED's).
Motor has capacity to draw up to 35 amps to increase peak operating conditions.
Operates up to 10-12 hours on a charge.
Recharge rate averages 8 hours from full discharge
On board 16 amp multistage self regulating battery charger
Very low threshold for automatic shut off
Charger self diagnostic lights

WHEELS
Foam filled 410mm rear tyres
Foam filled 305mm front tyre

BRAKES
Electronic, reverse motor current braking upon release of throttle.
Automatic parking brake with power off condition or emergency stop condition.
Manual parking brake release lever.
Dynamic braking
Regenerative braking is primarily used to stop the Powerpal.
This means the energy recovered when stopping is added to the battery.

CONTROLS
Manual operation:
Speed forward: 3.2 mph maximum.
Speed in reverse: 1.6mph maximum.
Handgrip variable speed throttle control.
Integral throttle guard.
Handle spring balanced for automatic adjustable operation heights.

SAFETY FEATURES
Automatic low battery warning.
Automatic overload shutdown.
Emergency overload current limiting.
Emergency reverse button.
Programmed acceleration and deceleration for operation control.
Constant feedback control of forward and reverse speeds.
Automatic parking brake.
Tyres underneath frame for pedestrian safety.
Warning horn in manual.
Vehicle motion buzzer with adjustable volume (quiet) plus on/off switch.
Hi-Lo speed switch to reduce speed for maneuvering.
Optional strobe light.

CUSTOMISATION
attachments can be customised to suit all types of equipment

Models
Powerpal 1000
Powerpal 3100
Powerpal 3150

Options
1.5 or 2 hp motor
Spring Hitch100-076;
28" (710mm) Dual Spring Hitch 850-008
14" (355mm) Dual Spring Hitch 850-022
Mail Hitch 850-027

Warranty
Unavailable

Standards
Specific Australian Standards or other Standard(s) may be applicable for materials, manufacturing processes, or installation of some types of equipment. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specific Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard(s).

Place Of Manufacture
Dane Technologies Inc (USA)

Dimensions
Length           1000mm
Width            750mm
Height           600mm
Weight         255kg
Ground clearance 100mm
Load capacity    greater than 3000kg (supplier stated)

Supplier Information - click to supplier for contacts details
MOBILITY INNOVATIONS,   MULGRAVE, NSW

Additional /images
No additional /images apply to this item

First   Prev Next   Last