NEW SEARCH NEW SEARCH, STATE - NSW
Next
Last
DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
Item Details
Q'straint Retractable Securement System
ILC Reference NO 51:49:005
Item sourced from ILC NSW database
Short Description
This vehicle wheelchair restraint consists of tracking mounted into a vehicle floor / wall, or floor plates (pockets), Four self tensioning webbing straps and occupant restraint lap belt system. It is suitable for powered and manual wheelchairs. Floor anchor points and straps can be fully customised to accommodate a variety of wheelchair dimensions.
Price Guide
Approx Price: $1,300.00
Price Date: 25/03/2009
Price from Accessible Transit Specialists
$1300 fitted
GST Exempt
More Details
The restraint system has four points of attachment on the wheelchair, two at the front and two at the rear. The wheelchair is secured to the vehicle by four automatically retracting webbing straps. These straps feature red release levers. Should an insert be used in the wheelchair, separate insert restraint belts are required. This restraint system is used in conjunction with the adjustable and retractable lap sash belt. It is suited for use with all common makes of wheelchair.
Floor anchor Points- A range of floor attachment points are available: either tracking or floor pockets. Tracking can be fitted above or recessed into the floor.
Restraint of Wheelchair- Four interchangeable webbing straps (two for front and two for the rear of wheelchair), each with a speed hook and automatic retractors. Each retractor has dual tensioning knobs. Each strap has red release levers. Each has a hard cover case to protect the straps when not in use. The Automatic retractors are anchored to the floor and the speed hooks attach to the wheelchair. The straps are self tensioned and secure the wheelchair in place.
Restraint of Occupant- A retractable lap sash belt is provided to be used to secure the wheelchair occupant in conjunction with the wheelchair restraint system.
Models
QRT Q-8100-A1 Deluxe Retractor System - as described.
QRT Q-8200-A1 Econo Retractor System - complete wheelchair and occupant restraint system, which includes 4 Econo retractors and a retractable and adjustable lap sash belt.
Options
Lap sash belt (static or inertia reel)
Installation
Supplier installs. The installation of floor plates must be inspected by an RTA certified engineer who provides a report. Training must be provided by the supplier in the use of the restraint system. An instruction book must be provided as well as written instructions displayed in the vehicle into which the system has been fitted.
Factors To Consider
The webbing should be checked regularly for signs of wear or fraying. Nicks greater than 1mm necessitates replacement. The product must be replaced immediately after it has been worn during a collision. No restraint system is considered safe to use with the occupant of a scooter travelling while sitting in the scooter. The occupant must transfer to a normal vehicle seat for the journey.
When purchasing a vehicle wheelchair restraint, consider also other vehicles in which the person may travel in their wheelchair (eg taxis, school bus etc.). This may influence the choice of restraint which is chosen for the family / individual's vehicle, as not all restraint fittings or modifications that are required on a wheelchair are compatible with all restraint systems.
Licence & Insurance Requirements
The installation of floor plates must be inspected by an RTA certified engineer who provides a report. Training must be provided by the supplier in the use of the restraint system. An instruction book must be provided as well as written instructions displayed in the vehicle into which the system has been fitted.
Standards
For some types of equipment, specific Australian Standards are applicable to the materials used in, and the manufacturing of and the installation of products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specified Australian Standards. Purchasers are advised to check with the supplier or manufacturer of an item as to its compliance with the relevant Australian Standard(s)
Place Of Manufacture
Canada
Supplier Information - click to supplier for contacts details
ACCESSIBLE TRANSIT SPECIALISTS,
REVESBY, NSW
WESTERN TRUCK EQUIPMENT PTY LTD,
ARNDELL PARK, NSW
Additional /images
Click Thumbnail to view larger image.
First
Prev
Next
Last
