NEW SEARCH NEW SEARCH, STATE - NSW
Next
Last
DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
Item Details
RAL Powered Wheelchair And Scooter Carrier
ILC Reference NO 51:23:006
Item sourced from ILC NSW database
Short Description
A trailer style carrier with a centre mono wheel which has a fold down ramp and is attached to the vehicle tow bar. It is designed to accommodate scooters and powered wheelchairs. Suitable for smaller vehicles as long as a tow bar can be fitted. Trailer size can be customised.
Price Guide
Approx Price: $2,600.00
Price Date: 20/06/2008
$2600 ex Bendigo (GST exempt)
More Details
. The frame is made from steel. The bed and ramp is made of checker plate material and available in a choice of colour.
. The carrier is hinged to move up and down, but cannot articulate sideways, allowing it to be reversed without jack knifing.
. The mono wheel can pivot 360 degrees under the tray, keeping the trailer short.
. The carrier has a fold down / fold up ramp and tilts to the side as a unit for loading and unloading.
. Tie down straps can be hooked anywhere around the edge of the tray.
Additional tie points can be added to order for specific scooters.
. A safety lockable system allows for a padlock to be used that will secure both carrier and load.
. Two telescopic legs with castors are fitted to the front of the trailer to support it when removing it from the towing vehicle.
Models
Two sizes available:
1300mm load length model
1500mm load length model
. Carriers come complete with jockey wheel support legs, ratchet tie-down strap and a spare wheel. They accept wheelchairs, 3 and 4 wheel scooters, and come in two sizes. One takes load up to 1500mm long the other 1300mm long.
Method Of Use
1. Pull out 'T' handle to unlock lever and lower ramp
2. Hold the bed horizontal until ramp is fully down
3. Tilt the carrier bed and ramp to the ground
4. Load, by backing the wheelchair / scooter in (so that the back wheel pushes the carrier bed back into the horizontal position)
5. Pull lever to raise ramp. Lock lever down with the T handle.
6. Tie down using the supplied ratchet tie down
7. Reverse the above to unload
Licence & Insurance Requirements
The manufacturer states that the RAL carrier has been approved for registration in NSW, Vic. SA, QLD, Tas. since 1993.
Standards
Specific Australian Standard(s) and other standards may be applicable to materials, manufacturing processes or installation of some types of equipment. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specific Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard (s).
· ·
Place Of Manufacture
Victoria, Australia
Dimensions
Size 1
Load
Overall length (mm) 1300 (maximum)
Overall width (mm) 735
Load capacity (kg) 150
Size 2
Load
Overall length (mm) 1500 (maximum)
Overall width (mm) 735
Load capacity (kg) 150
Supplier Information - click to supplier for contacts details
RAL INNOVATIONS P/L,
WHITE HILLS, VIC
Additional /images
No additional /images apply to this item
First
Prev
Next
Last
