username
password
 
login panel
 
  NEW SEARCH   NEW SEARCH, STATE - NSW

Click for Printer Friendly Version of this information.
First    Next page Next   Last

DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.



Item Details

Braun Millenium Series Wheelchair Lifters

ILC Reference NO 51:22:004
Item sourced from ILC NSW database


Wheelchair Lifter

Short Description
A range of hydraulically powered one piece platform, internal hoists, designed to lift a person seated in a manual wheelchair or powered wheelchair or scooter into and out of a van or bus. Mounts to the side or rear of a van. Two models available.

Price Guide
Approx Price: $7,500.00
Price Date: 25/03/2009
Price from Accessible Transit Specialists


More Details
The wheelchair lifts are constructed of powder coated aluminium frame with a mesh lifting platform. The lift has a powered raise / lower and folding / unfolding which can be operated by the occupant or attendant. The lift is powered via the vehicle's battery. In case of power failure the lift features a manually operated lever handle that can raise / lower the lifting platform.

The lifting platform folds up inside the side or rear door whilst travelling.

Features
Controller - the control station switch panel has wide paddle type rocker switches which are colour coded and labelled with their performed function. The lift is also equipped for operation by the wheelchair occupant and features a plug in wiring harness to accommodate automatic door operators, remote, third station, or a hand held controls.

Door Operators available to automatically open the vehicle doors to allow for use of the lift. Models available to suit side double doors, rear double doors and sliding doors. Structural modification may be required for some vehicles to fit the door operators.

Safety Features - the lift has an automatic roll stop which activates prior to lifting the platform.


Models
LIFT VARIATIONS
Model L955U314248 - Full size van with standard height doors.
Model L955U314652 - Full size van with 1350mm high raised doors.
Model L955U315056 - Full size van with 1425mm high raised doors.


Options
An optional threshold warning kit is available. When the lift is below vehicle floor level, an audible signal will warn passengers as they approach the open lift doorway.

Installation
An approved wheelchair and occupant restraint must be installed when transporting a person in a wheelchair.

Installation Variations
Flat Floor Application - standard model.
Stepwell Application - a conversion of the flat floor application when the lift is installed into a step well on a vehicle. This provides a longer platform length in comparison to the standard model.



Standards
Specific Australian Standards or other Standard(s) may be applicable for materials, manufacturing processes, or installation of some types of equipment. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specific Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard(s).

Place Of Manufacture
BRAUN CORPORATION

Dimensions
Flat Floor Application
Load Capacity (supplier stated) NSW............... Unknown
Lifting Range..................................... 1050 mm
Platform Width.................................... 775 mm
Platform Depth.................................... 1050 mm

Stepwell Application
Load Capacity (supplier stated) NSW............... Unknown
Lifting Range..................................... 1050 mm
Platform Width.................................... 775 mm
Platform Depth.................................... 1200 mm


Supplier Information - click to supplier for contacts details
ACCESSIBLE TRANSIT SPECIALISTS,   REVESBY, NSW
WESTERN TRUCK EQUIPMENT PTY LTD,   ARNDELL PARK, NSW

Additional /images
No additional /images apply to this item

First    Next page Next   Last

page spacer