NEW SEARCH NEW SEARCH, STATE - NSW
Next
Last
DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
Item Details
Concord Pal Vertical Wheelchair Platform Lift
ILC Reference NO 44:45:056
Item sourced from ILC NSW database
Short Description
A vertical wheelchair platform lift available in four models for indoor and outdoor applications. It is battery powered and has a cable hydraulic drive system. If this lift is to be used in a public building it must comply with the relevant Australian Standard. Contact the supplier for details.
Price Guide
Approx Price: $26,000.00
Price Date: 10/02/2009
PAL-S $26000 - $45000
PAL-SE $39000 - $55000
PAL-EN $47000 - $68000
Includes supply, installation and 12 months free service in metropolitan areas.
GST exempt
More Details
STANDARD P.A.L. FEATURES:
. Emergency battery powered lowering and raising
. Smooth and quiet 1:2 cable hydraulic drive system
. Aluminium car frame with baked polyester electrostatic paint finish
. Emergency manual lowering device
. Slack cable safety drive
. Skid-resistant flooring
. Automatic battery recharging system
. Detachable platform base and sling
. Emergency cab light
. Cab handrail
LIFT SPECIFICATIONS:
. Power 110 volt converted to 24 volt DC
. Drive Type 1:2 cable hydraulic
. Rated Load Capacity 341 kg
. Platform Dimensions (clear) 1372 mm L
. Emergency Backup - Battery operation and down direction device
. Control System Key controlled constant pressure
. Rated Speed .08 m/s (nominal)
Models
. S - Standard model is designed for a variety of hoistway applications.
. EN - Enclosed model is enclosed to the upper gate in plexiglass or steel.
. SE - Semi-Enclosed model is enclosed on the upper landing.
. EXT -Exterior model is designed with added features for exterior use.
Options
. 1.5 hour, UL Listed fire-rated doors
. Custom finishes in stainless, glass or bronze
. Domes for enclosure models
. (EXT) exterior weather resistant package
. Gates, doors and bridges
. Variety of platform lengths 1219 mm, 1371 mm and 1524 mm
. Ninety degree or side load platforms
. Automatic and fixed ramps
. Call / send controls
. Attendant operated package
. Portable units
. Custom colours in baked polyester finish
. Designed for commercial and residential use.
. Each model has a choice of 6 maximum lifting heights from 1220 mm to 4270 mm.
Installation
In NSW the owner or controller of the lift (if not the owner) is required to register their lift with WorkCover. They need to complete Form PL2 Application For Item Registration of Lift / Escalator and Moving Walkway. A fee of $65 is charged for a lift installed in a public place. The applicant must state that the plant has been inspected by a competent person and is safe to operate (use).
It is compulsory that the lift be inspected annually by a competent person. WorkCover requires payment for registration as well as an annual fee.
Request further details from the supplier or contact WorkCover Plant Registration Unit Tel: 02 9370 5221. If outside the Sydney metropolitan area, phone the WorkCover NSW Client Contact Centre on 13 10 50 or the nearest WorkCover Regional Office.
It is an offence to operate plant that is not correctly registered under the Occupational Health and Safety Regulation 2001.
Standards
For some types of equipment, specific Australian Standard(s) are applicable to the materials used in, the manufacturing processes applied to and the installation of products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specified Australian Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Australian Standard(s).
Place Of Manufacture
CONCORD (USA)
Dimensions
Overall Length 1291 - 1523 mm
Load Capacity 341 kg
Max. Range 1.22 - 4.27 m
Lift Speed 0.08 m/sec
Supplier Information - click to supplier for contacts details
ACCESS ELEVATORS AUSTRALIA PTY LIMITED,
WETHERILL PARK, NSW
Additional /images
No additional /images apply to this item
First
Prev
Next
Last
