NEW SEARCH NEW SEARCH, STATE - NSW
First Next Last
DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
Item Details
Allegro Alto 200 Lifter
ILC Reference NO 44:12:037
Item sourced from ILC NSW database
Short Description
A medium sized mobile, battery operated hoist which may be used to lift and transfer a person to and from a bed, chair or the floor. The hoist is compatible with a standard spreader bar or tilting frame / pivot frame. Suitable for domestic and healthcare facility use.
Price Guide
Approx Price: $2,900.00
Price Date: 08/10/2007
Price from Active Mobility Systems
From $2900
More Details
FRAME
This steel framed, epoxy coated hoist has an upright mast. A rectangular shaped push handle is mounted at the top of the mast.
BOOM
An angled boom with a padded end and either a standard spreader bar with two attachment points at each end for the slings or a tilting pivot frame (uses pivot slings with keyhole fittings) .
CONTROLS
Hand held controls are attached to an extendable cord.
BASE
The 'U' shaped base has electric leg spread.
SLINGS
See Options
Models
. Alto Lift 200 - a medium sized heavy duty patient lifting hoist with a load capacity of 200kg
. Sonata 150 Compact Mobile Patient Lifting Hoist with a load capacity of 150kg
Options
- Tilt pivot frame
- Weighing Unit
- Four point yolk
- Slings range in sizes from XS through to XXL and are provided in the following styles: General purpose, general purpose with head support, tilt and pivot, amputee, and paediatric slings.
Standards
Specific Australian Standards or other Standard(s) may be applicable for materials, manufacturing processes, or installation of some types of equipment. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specific Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard(s).
Compliant with ASA ISO 10535-2002
Compliant with ISO 10535:1988
Place Of Manufacture
NSW Australia
Dimensions
Standard
Load Capacity (supplier stated) NSW............... 200 kg
Weight of Heaviest Part NSW....................... Unknown
Base Height (clearance) NSW....................... 125 mm
Base Width Maximum (int measurement open) NSW..... 1130 mm
Base Width Minimum (ext measurement closed) NSW... 645 mm
Base Length NSW................................... 1150 mm
Spreader Bar Height NSW........................... From 362 mm to 1785 mm
Tilting Frame Height NSW.......................... Unknown
Height NSW........................................ Unknown
Additional Dimensions
Lifting Range..................................... 1060 mm
Supplier Information - click to supplier for contacts details
ACTIVE MOBILITY SYSTEMS,
LIDCOMBE, NSW
ALLEGRO CONCEPTS PTY LTD (MANUFACTURER),
LIDCOMBE, NSW
Additional /images
No additional /images apply to this item
First
Next
Last