NEW SEARCH NEW SEARCH, STATE - NSW
Next
Last
DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
Item Details
AC Mobility Atigra Powered Wheelchair
ILC Reference NO 43:42:049
Item sourced from ILC NSW database
Short Description
A mid wheel drive, rigid framed, powered wheelchair with a steel and aluminium frame. The chair is suitable for indoor or outdoor use and is designed for adolescents and adults. It comes in a range of seat widths and can be customised. A range of power assist and other options are available.
Price Guide
Approx Price: $0.00
Price Date: 06/07/2009
Contact supplier for prices
More Details
FRAME
The frame and power base of the Atigra is made from mild and bright steel and aluminium. Specifically designed and labelled tie down positions for wheelchair restraint straps are located at the front and rear of the base frame, when transporting the wheelchair in vans and buses.
FRAME COLOURS
There are 9 colour options: Sensuous Red, Lime Twist, Purplelicious, Sapphire Blue, Liquid Silver, Midnite Black, Royal Blue, Burnt Orange or Kiwi Green.
POWER SEAT OPTIONS
Power assist tilt in space, power backrest recline, power elevating legrests and power seat raise is optional. There are two angle ranges of tilt in space, to select from. If required, the system can be changed by a technician in the field, from one range to the other without any changes in hardware.
Features
SEAT
The power base has been designed to allow for adjustability of the seat width, seat depth, backrest angle and backrest height. Seat depth adjustment is built into the frame, requiring a spanner to complete the task. Adjustment to the seat depth only, does not require a change to the upholstery nor any other part of the chair.
The seat width is manually adjustable. This feature is built into the frame and requires Allen keys to complete. Adjustment to the seat width requires a change to the backrest bracing bar and different upholstery.
The T2 seat system can be supplied with the wheelchair, with the choice of a padded seat, a metal seat pan or a padded seat board, which can be used as a base for a commercial or custom made cushion.
A padded T2 seat system backrest or commercially made backrest can be supplied with the chair. The cane widths are set to accept the American made backrests which are supplied in Imperial (inch) widths. The backrest canes will also easily accept custom made backrests, including a slung backrest if required.
UPHOLSTERY
The T2 seat uses a firm base foam, with a visco elastic overlay, covered with black Dartex. The upholstery is washable.
BACKREST
The backrest is attached to the frame by clamps which can be loosened to adjust the backrest to the appropriate height. The backrest angle can be manually adjusted.
HEADREST
An angle and height adjustable headrest can be mounted to the backrest rigidizer bar. This is an accessory, not included as standard.
ARMRESTS
The armrests are height adjustable and removable. The armrest pad can be moved forwards or backwards to suit the user and comes with side panels. Armrests can be customised if required.
LEGREST
The legrests can be swung away and removed as required. The legrests are height adjustable. The T2 seat uses heavy duty legrest hangers.
FOOTPLATES
The aluminium heavy duty footplates can be oriented longitudinally or laterally. They are adjustable in height to accommodate for leg length and can be set at a range of angles with options to accommodate for varying ankle positions. They allow for forwards and backwards movement; side to side (lateral) movement; up and down (dorsiflexion and plantarflexion) movement and inversion or eversion movements.
WHEELS
Pneumatic drive wheels are 30mm x 80mm (3" x 14")
CASTORS
Front and rear castors are 50mm x 150mm (2" x 6")
CONTROLS
The Atigra uses the Dynamic DX2 or the JX2 power wheelchair control system as standard. It can be mounted on either side of the wheelchair. The DX2 has a large LCD screen, displaying the mode in use. The on/off button has audible feedback. The buttons to control the speed and mode selection are slightly raised and have a tactile feature. The unit is programmable via Dynamic tools (Wizard software and DX-HHP). The joystick supplied with the wheelchair is a standard short post unit.
BATTERIES
2 x 38 amp hour gel batteries are recommended by the supplier. A separate 6 - 8 amp battery charger is supplied, which plugs into the front of the chair.
MOTOR
PM90, high torque 2 pole motors, with a GB-12 gearbox are used in the Atigra. The motor can be disengaged by releasing the bracket on the drive wheel hubs. The wheelchair has been designed to climb a 50mm step.
Models
Only one model is available, with a variety of options.
Options
UPHOLSTERY OPTIONS
Vinyl: black, light grey, dark grey.
Twill: red, blue, green.
POWER SEAT OPTIONS
Power tilt in space: 0 - 38 degrees, 7 - 45 degrees.
Power backrest recline.
Power elevating legrests.
Power seat raise.
LEGRESTS
Manual elevating legrests
Power assist elevating legrests
Stump support
CONTROL SYSTEMS
Dynamic Controls DX2
Dynamic Controls G90A
Attendant control
Chin control
CONTROL BRACKETS
Swing back
Height adjustable
JOYSTICKS
Foam ball
Long post
"T" bar
"U" bar
Custom made
SWITCHES
Buddy button - 40mm diameter: blue, green, red, yellow, purple
Micro lever switch - black, red
ACCESSORIES
Rear or side bags
Bag hooks
Headrest - angle and height adjustable
Lateral thoracic supports - swing away, heavy duty, position and angle adjustable.
Leg rest protectors
Seat belt - automotive style
Tray - 6mm acrylic or 10mm Lexan
Maintenance
All wheelchairs require regular maintenance. Refer to User Manual for specific details.
Standards
For some types of equipment, specific Australian or other Standard(s) are applicable to the materials used in, the manufacturing processes applied to and the installation of products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specific Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard(s).
Place Of Manufacture
Western Australia
Dimensions
Standard
Load Capacity (supplier stated) NSW............... 125 kg
Width NSW......................................... 665 mm
Seat Width NSW.................................... From 406 mm to 508 mm
Seat Depth NSW.................................... From 406 mm to 508 mm
Seat Height NSW................................... 460 mm
Backrest Height NSW............................... 450, 520 or 600 mm
Armrest Height (from seat) NSW.................... Unknown
Clearance Under Base.............................. Unknown
Turning Circle.................................... Unknown
Additional Dimensions
Standard
Backrest Angle...................From 80 degrees to 120 degrees
Footrest Depth...................210mm
Footrest Width...................175mm
Overall Depth....................910 mm
Overall Height...................1060 mm
Weight of Heaviest Part..........N/A
Overall Weight (kg)..............93 kg (without batteries)
Overall Weight (kg)..............132 kg (with batteries)
Speed (km/hr)....................10 km/h (Approximate maximum speed)
Seat Angle.....................From 0 degrees to 10 degrees (manual adjustment on standard)
Power tilt in space options:
Seat Angle.................... From 7 degrees to 45 degrees
Seat Angle.....................From 0 degrees to 38 degrees
Supplier Information - click to supplier for contacts details
AC MOBILITY (REHAB WA) (MANUFACTURER/IMPORTER),
MALAGA, WA
ACTIVE MOBILITY SYSTEMS,
LIDCOMBE, NSW
Additional /images
Click Thumbnail to view larger image.
First
Next
Last
