NEW SEARCH NEW SEARCH, STATE - NSW
Next
Last
DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
Item Details
Alrick Series 8350 Bariatric Electrically Adjustable Bed
ILC Reference NO 21:10:046
Item sourced from ILC NSW database
Short Description
A mobile electrically operated bed with position adjustments to the backrest, knee break, bed height, Trendelenburg and reverse Trendelenburg. Suitable for bariatric users. Available in two sizes. A range of options and accessories are available.
Price Guide
Approx Price: $7,800.00
Price Date: 25/11/2008
Price from Acute Healthcare
More Details
Frame
The frame of the bed is made from powder coated steel with a solid sheet metal mattress base and four corner buffs.
Headboard/Footboard
A range of headboards and footboards is available.
Adjustments
Backrest angle, knee break position, bed height and forward and reverse Trendelenburg tilt. These may all be operated independently.
Controls
are hand held on an extendable cord. Single control piece with flat rectangular push buttons, which each have a specific function, operates the beds.
Mattress
Various mattress options including convoluted or standard foam. Covers may include a vapour permeable, breathable, water resistant cover with two way stretch.
Castors
The bed has 200mm solid rubber, central lock castors.
Brakes
Central locking pedal type brake operates on all four castors.
Bed Rails
Side rails are optional and fold down alongside the bed.
Safety Features
Battery back up is available to enable the bed to be operated in the event of power failure.
CPR release
Power Source
is through a 240 volt power point. The power is supplied to the hand piece through a 12 volt transformer.
Motor
Battery back up
Dismantling
Bed does not dismantle
Note:
- legrest raise: leg section of bed elevates and bends at knee area and the foot end of the bed remains elevated parallel to the bed frame
- Knee break: leg section of bed elevates and bends at knee area so the legs below the knee are angled downwards (triangular configuration)
- Trendelenburg Tilt: allows the entire bed to tilt so a person's feet can be higher than their head. Reverse Trendelenburg tilts the bed in the opposite direction.
Models
900mm width
1070mm width
1200mm width
Options
- CPR release
- self help pole
- IV pole
- Bed extensions (clip on or pull out)
- range of bed rails
- manual or electric leg raise adjustment
- range of head and foot boards
- 125mm, 150mm castors
- bed mover wheel set (for moving the bed vertically through doorways)
- range of mattresses
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For a fact sheet about standards contact us or visit www.ilcaustralia.org/home/standards.asp
Place Of Manufacture
Alrick Manufacturing (NSW) Australia
Dimensions
1070mm Width Model
Load Capacity (supplier stated) NSW............... 300 kg
Length NSW........................................ 2230 mm
Base Height (clearance) NSW....................... Unknown
Height NSW........................................ From 500 mm to 750 mm
Width NSW......................................... 1150 mm
120mm Width Model
Load Capacity (supplier stated) NSW............... 350 kg
Length NSW........................................ 2230 mm
Base Height (clearance) NSW....................... Unknown
Height NSW........................................ From 500 mm to 750 mm
Width NSW......................................... 1280 mm
Additional Dimensions
1070mm Width Model -Trendelenburg tilt angle.........-12 to 12 degrees
1200mm Width Model-Trendelenburg tilt angle.........-12 to 12 degrees
Supplier Information - click to supplier for contacts details
ACUTE HEALTHCARE,
SEVEN HILLS, NSW
ALRICK MANUFACTURING,
LAKE CARGELLIGO, NSW
MOBILITY 2 YOU,
ERINA, NSW
REGENCY HEALTHCARE,
SOUTH WINDSOR, NSW
WATERCOMFORT CO, THE,
TAREN POINT, NSW
Additional /images
No additional /images apply to this item
First
Prev
Next
Last
