NEW SEARCH NEW SEARCH, STATE - ACT
Next
Last
DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
Item Details
Enware Enmatic Wall Kit
ILC Reference NO 81:51:216
Item sourced from ILC ACT database
Short Description
Taps with an electronic sensor, that allows the tap to be turned on/off by breaking an infrared beam with an object (e.g. hand). Two models available.
Price Guide
Refer to supplier details for pricing.
Method Of Use
BENCH MOUNTED
The water will continue to flow while hands remain in the vicinity of the sensor. When hands are removed from the sensor the water will turn off within 2 seconds. The water will run for a maximum of 45 seconds to 50 seconds before the sensor needs to be reset
WALL MOUNTED
Wave hands within 5cm to 10cm of the sensor to turn on the water. A second pass will turn the water off, or if the water is allowed to run, the sensor will turn off after 45 seconds. An LED light indicates when an object is in front of the sensor.
Models
BENCH MOUNTED SENSOR
Positioned at the base of the water outlet. Kit includes: 150mm fitted spout; solenoid valve with 2 metre lead; 24V.A.C power pack and 2 metre lead; sensor panel and mounts; installation instructions.
WALL MOUNTED KIT
150mm fixed bath outlet; solenoid valve and 2 metre lead; 24V.A.C power pack with 2 metre lead; sensor panel and mountings; installation instructions.
Installation
Must be installed by a licensed plumber and electrician.
BENCH MOUNTED
Can be installed into most single hole basins or sinks.
WALL MOUNTED
Selecting a location of the sensor panel should include consideration of: ease of operation; passing traffic; obstructions near the sensor. Up to 500mm clearance may be necessary from reflective surfaces such as ceramic tiles and stainless steel, directly in front and parallel to the sensor.
Dimensions
WALL MOUNTED SENSOR PANEL
Overall width (mm) 130
overall height (mm) 80
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information on what standards the equipment may need to meet, see http:// www.ilcaustralia.org.au/home/standards.asp
Place Of Manufacture
Enware (NSW) Australia
Supplier Information - click to supplier for contacts details
ENWARE PTY LTD,
CARINGBAH, NSW
REECE,
22 MORT ST, BRADDON, ACT
SOUTHERN PLUMBING SUPPLIES,
, ACT
TRADELINK PLUMBING SUPPLIES,
FYSHWICK, ACT
Additional /images
Click Thumbnail to view larger image.
First
Prev
Next
Last
