NEW SEARCH NEW SEARCH, STATE - ACT
Next
Last
DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
Item Details
Excellent Ramp Shower Recess Raise and Ramp
ILC Reference NO 81:34:219
Item sourced from ILC ACT database
Short Description
A modularly constructed height adjustable ramp and floor system that can be used to raise a shower recess floor to the level of the hob and construct an access ramp. Each module consists of solid one piece polyethylene with a grid of square holes. These are available with
or without sloped edges.
Price Guide
Refer to supplier details for pricing.
More Details
. The modules are interconnected with special plastic fastenings and are assembled in layers until the required height / gradient is achieved.
. They can fit any opening and hob height
. The gradient can be adjusted precisely to requirements
. The ramps can be fitted with both inward and outward corner modules. This makes it possible to negotiate the ramp from all sides.
. The holes facilitate drainage and are used for the insertion of fastenings.
. The hob remains intact
. The system can be used anywhere where a ramped surface is required such as over steps, sliding doors, as well as shower hobs.
. Can be taken apart and reassembled as many times as desired.
self draining, slip resistant surface
. Withstands temperatures from 140 deg C to +100 deg C
. Colourfast and UV resistant
. Individual pieces can be purchased
. Recyclable
. Tolerates all household cleaning solutions
. Colour - grey
Models
Components
. Tile 12503
. Ramps 12505
. Corner Ramp 12507
. Half Tile 12510
. Half Ramps 12511
. Infill Tile 12999
. T Locks 12732
. R Locks 12742
. Mounting Pads 12690
. K Tube 2m (Guard rail with K locks) 17100
Installation
. The pieces are fastened together with three special types of plastic lock using a rubber
hammer. They are fixed to the subfloor with screws. Individual modules can be sized to fit
using a knife or a normal saw.
. The supplier offers an installation service.
Dimensions
Tile 12503
Overall width 250mm
Overall length 250mm
Overall height 18mm
Ramps 12505
Overall width 250mm
Overall length 140mm
Overall height 18mm
Corner Ramp 12507
Overall width 125mm
Overall length 140mm
Overall height 18mm
Half Tile 12510
Overall width 125mm-250mm
Overall height 18mm
Half Ramps 12511
Overall width 125mm
Overall length 140mm
Overall height 18mm
Standards
For some types of equipment, specific Australian or other Standard(s) are applicable to the materials used in, the manufacturing processes applied to, and the installation of products. Compliance with relevant Standards is indicated by written certification that a product has
been tested and assessed as compliant with specified Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard(s).
Place Of Manufacture
Denmark
Supplier Information - click to supplier for contacts details
INDOMED PTY LTD,
O'CONNOR, WA
Additional /images
No additional /images apply to this item
First
Prev
Next
Last
