Product Search - Pentax Camera with Remote Interface Switch

Next Last

DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.

Item Details

Pentax Camera with Remote Interface Switch

ILC Reference NO 71:40:029
Item sourced from ILC ACT database

Short Description
This specially designed interface allows the user to access both the shutter and zoom functions of the camera with the same switch. Alternatively, two switches are used, one for each function. The interface can be supplied with Pentax Optio-S10, Optio-S12 and Optio- A40 cameras.

More Details
The camera can be attached, with suitable mounting hardware, to the front of the user's wheelchair.
A suitable switch can be plugged into the interface and positioned to suit the user.
Users with adequate hand function may be able to use a camera mount with a 'Pan Tilt' handle. This enables a more accurate shot to be framed.
The switch and mounting hardware are purchased separately.

Models
Pentax Camera Packaged with Remote Control Switch Interface
Optio-S10-SSI
Optio-S12-SSI
Optio-A40-SSI

Options
Camera Mount Options
Camera Mount - without Pan/Tilt
A Universal Switch Mount can be fitted with a camera bracket and used to mount the camera on to a wheelchair, table, etc.
An optional Pan/Tilt adaptor can be added to the Universal Switch Mount for better control of camera positioning. This may suit those with enough hand function to move the pan/tilt handle. Code UMSF :CMPT

Method Of Use
Single Switch Operation
Press and hold switch to activate. A zoom signal will be sent every two seconds while the switch remains activated. The camera steps through three zoom settings that is, wide, medium and telephoto
Release the switch when the desired zoom setting is achieved
Press switch briefly to activate the shutter (switch press of a short duration)
The Camera Remote Control will beep each time an infrared signal is sent to the camera

Two Switch Operation
Press Switch One to activate the shutter
Press Switch Two and the camera will step to the next of three zoom settings that is, wide, medium and telephoto

Place Of Manufacture
Australia.

Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For a fact sheet about standards contact us or visit www.ilcaustralia.org/home/standards.asp

Supplier Information - click to supplier for contacts details
TECHNICAL SOLUTIONS, SILVAN, VIC

Additional /images
No additional /images apply to this item

First Prev Next Last