NEW SEARCH NEW SEARCH, STATE - ACT
Next
Last
DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
Item Details
Marker Engineering Wireless Door Monitor DM2
ILC Reference NO 61:59:012
Item sourced from ILC ACT database
Item on Display
Wireless Door Monitor DM2
Short Description
A door monitor with a wireless receiver that will alert family and carer's when a door is opened. The receiver can be located in the one position, or used as a portable unit. The alarm is battery operated - batteries are provided. Suitable for domestic applications.
Price Guide
Refer to supplier details for pricing.
More Details
The alarm has two components:
RECEIVER
The unit has a switch for off and volume level (high or low) and requires 2 x AA batteries. It can be carried in a pocket or clipped onto a belt using the built-in clip, or kept in one location. If used as a portable unit, it is recommended that it be tested in all the required locations to ensure the reception and range is adequate.
TRANSMITTER
. The transmitter is mounted high up on the outer edge of the door frame (ie. on the latch side of the door). A small magnet is attached to the corner of the door adjacent to the transmitter, no more than 3 - 8 mm apart. When the door is opened, the break in the connection between the magnet and transmitter causes the receiver alarm to sound.
. The transmitter requires a 9 volt battery. An on/off toggle switch is located on the left side of the unit.
. The transmitter and magnet can be initially mounted using double sided tape, and then screwed into position once it has been tested.
Both units can be turned off when not in use, to prolong battery life.
Options
Alarm can be converted to work on a floor pressure mat
Models
Door monitor
Pressure mat monitor
Dimensions
TRANSMITTER
Overall width (mm) 40
Overall length(mm) 110
Overall depth (mm) 25
RECEIVER
Overall width (mm) 65
Overall length(mm) 90
Overall depth (mm) 30
Warranty
unknown
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information on what standards the equipment may need to meet, see http:// www.ilcaustralia.org.au/home/standards.asp
Place Of Manufacture
unknown
Display Item On Loan From
Marker Engineering Pty Ltd
Display Information
ILCACT may have this item on display. If you want to view or trial this product, please contact ILCACT on 02-6205 1900 to ensure that it is still on display prior to your visit.
Supplier Information - click to supplier for contacts details
MARKER ENGINEERING PTY LTD,
HAWTHORN, VIC
Additional /images
No additional /images apply to this item
First
Prev
Next
Last
