Product Search - Tieman Wheelchair Hoists For Buses And Vans

Next Last

DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.

Item Details

Tieman Wheelchair Hoists For Buses And Vans

ILC Reference NO 51:22:002
Item sourced from ILC ACT database

Short Description
An Australian built range of fully automatic and semi automatic Electro hydraulic vehicle hoists for the purpose of lifting a person in a wheelchair into a passenger van or bus. There are 3 basic models. The hoists can be installed internally (into a side or rear door) or externally (to a rear door). The platform folds vertically to minimise storage space. Can be customised.

More Details
. All models are fully automatic with hand held remote controls. They use 12 or 24 Volt DC and have manual back up pump (as required by Australian Standard).
. Side edge barriers are fitted with automatic front and rear safety flaps on the internal models. These also have self locking passenger support handles.

SAFETY:
. An approved wheelchair and occupant restraint system must be installed.
. Brakes must be applied whilst on the platform.
INSTALLATION:
. Modifications and installation must be done by an approved automotive engineer and approved by Motor Registry.
MODIFICATIONS AVAILABLE
Tracking type wheelchair restraints with lap belts
Tracking type wheelchair restraints with lap sash belts
4 point wheelchair and occupant restraints
Hand rail inside vehicle
Relocation of 3 seater, 2 seater and single seat
Lap belt
Engineers report
RTA inspection
Relocate spare wheel
Spare wheel cover
Fire extinguisher
Door kit for 23 seater buses
Extra leaf springs for small vehicles
Relocation of heater and covers
Floor tracking for removable seats
Seat base for removable seat (2 seats)
Ply wood infill
Rubber floor matting
SERVICE:
. Tieman offers a mobile Australia-wide service including specialty vehicles equipped for roadside Tailgate repairs. On 24 hour call, 7 days a week. Repair Tieman, Braun or Ricon hoists.

MODELS:
. TD 350H
. Short or long platform models
. Located internally in rear or side of vehicle.
. One piece platform suitable for heavy usage vehicles. Will not cause rattles in the rear of the vehicle.
. TD 350L
. Internal wheelchair hoist with split mesh platform.
. Suitable for rear or side of vehicle installation.
. Split platform allows easy access through the rear of the vehicle when the hoist is stored. Suitable for private vehicles.
. TD 350A
. Externally mounted on rear of vehicle.
. Allows for more storage space inside the vehicle and maximises seating capacity.
. Folded platform adds 150mm to length of vehicle.

Installation
If fitted internally, body and door modifications may be required and usually means the removal of the rear seat.

Dimensions
TD350A
Platform width  (mm)    1070
Platform length (mm)    1220
Ramp length     (mm)     200
Weight overall  (kg)     170
Load Capacity   (kg)     350

TD350L
Platform width  (mm)     760
Platform length (mm)    1070
Ramp length     (mm)     110
Weight overall  (kg)     153
Load Capacity   (kg)     350

TD350H
Platform width  (mm)     760
Platform length (mm)    1170 or 1300
Ramp length     (mm)     110
Weight overall  (kg)      160
Load Capacity   (kg)      350



Place Of Manufacture
TIEMAN INDUSTRIES (NSW)
Australian Made

Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information on what standards the equipment may need to meet, see http:// www.ilcaustralia.org.au/home/standards.asp

Price Guide
Refer to supplier details for pricing.

Supplier Information - click to supplier for contacts details
TIEMAN INDUSTRIES PTY TD (NSW),   WETHERILL PARK, NSW

Additional /images
No additional /images apply to this item

First   Prev Next   Last