Product Search - Baribunma Powered Wheelchair

Next Last

DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.

Item Details

Baribunma Powered Wheelchair

ILC Reference NO 43:42:008
Item sourced from ILC ACT database

Short Description
A unique front wheel drive powered wheelchair that can be used indoors and outdoors. Comes standard with a contoured Kia vehicle seat, but can be used with other seating options or any approved automotive seat. Suitable for use in variety of vehicles (as passenger or driver) with minimal or no modification required to vehicle and can be used on public transport and aircraft. Seating system can be customised.

More Details
FRAME
Standard: Rigid frame.

SEAT
Standard: Contoured Kia vehicle seat, high density foam.
Optional: Other seating systems can be mounted including other approved vehicle seating.

UPHOLSTERY
Standard: Unknown
Optional: Depends on other seating system selected.

BACKREST
Standard: Contoured Kia vehicle seat, high density foam. Angle adjustable using left or right sided lever. No push handles as it is a car seat.
Optional: Other backrest seating can be mounted.

HEADREST
Standard: Car seat style headrest.
Optional: Other headrest can be mounted as per seating system selected.

ARMRESTS
Standard: Flip up, full length.
Optional: Other armrests can be mounted as per seating system selected.

LEGREST
Standard: Unknown
Optional: Unknown

FOOTPLATES
Standard: Separate, flip up footplates with heel loops. Position of footplates change according to height of wheelchair.
Optional: Unknown

WHEELS
Standard: Front wheels are large foam filled tyres. Rear wheel suspension to maintain vertical casters.
Optional: Unknown

CASTORS
Standard: Rear microcilliar castors.
Optional: Unknown

CONTROLS
Standard: Joystick
Optional: Unknown.

BATTERIES
Standard: Sealed gel battery.

MOTOR
Motor disengagement: freewheeling hubs

TRANSPORT
Standard: tie down points

CUSTOMISATION
Any form of seating system can be mounted.

BRAKES
Standard: Manual & electric braking mechanisms.

ACCESSORIES
Seatbelt feature to allow use of standard vehicle seatbelt
Off board charger

Models
Only one model is available. Any seating can be mounted.

Dimensions
Seat Width...............From 420 mm to 520 mm, Can be customised. Rear & front widths respectively
Width bet.Armrests.......500 mm, Can be customised.
Seat Depth...............480 mm, Can be customised.
Seat Angle...............Unknown,Can be customised.
Seat Front Height....... From 360 mm to 560 mm, Can be customised.
Backrest Width...........490 mm, Can be customised.
Backrest Height..........620 mm, Can be customised.
Backrest Angle...........From 0 degr to 90 degr, Can be customised.
Height of Armrest from Seat .. 230 mm, Can be customised
Footrest Height from Floor...From 340 mm to 530 mm
Clearance Under Base.....From 170 mm to 405 mm
Overall Width............610 mm
Overall Length...........From 1050 mm to 1200 mm Depends on whether wheelchair raised or lowered.
Weight of Heaviest Part..Unknown
Load Capacity (supplier stated).. 135 kg
Speed (km/hr)............ 10 km/h
Range (km)................14 km
Turning Circle............From 1120 mm to 1310 mm Depends on whether wheelchair raised or lowered.
Battery Voltage...........24 volt

Place Of Manufacture
Australia

Warranty
5 years limited warranty

Maintenance
All wheelchairs require regular maintenance. Refer to User Manual for specific details.

Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information on what standards the equipment may need to meet, see http:// www.ilcaustralia.org.au/home/standards.asp

Price Guide
Refer to supplier details for pricing.

Supplier Information - click to supplier for contacts details
BARIBUNMA MOBILITY SYSTEMS, PEAKHURST, NSW

Additional /images
No additional /images apply to this item

First Prev Next Last