NEW SEARCH NEW SEARCH, STATE - ACT
Last
DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
Item Details
Magic Mobility Frontier X5 Mid Wheel Drive
ILC Reference NO 43:41:003
Item sourced from ILC ACT database
Short Description
A powered, mid wheel drive wheelchair with a rigid steel frame. It is suitable for indoor and outdoor use, including terrain such as sand and snow. The wheelchair is available with several seating systems and is available with power tilt, recline and seat height elevation. A range of accessories are available. It is suitable for a youth or adult and is available in a range of seat sizes.
Price Guide
Refer to supplier details for pricing.
More Details
Frame
This wheelchair features a rigid, epoxy coated, mild steel frame
It has two mid mounted motors
All six wheels maintain constant contact with the terrain through the articulated suspension frame
There is independent suspension on the drive wheels
A range of frame colours are available
Anti-tip wheels are located at the rear
Seat
The MPS seat is standard. It is a car seat style that incorporates an anti-thrust seat front and lateral contouring on the seat and high backrest
An optional modular seating system is available that can accommodate various seating systems
A flat board seat with MPS backrest is available for use with a pressure reduction cushion
The seating can be customised
Powered tilt in space and powered seat elevation are optional
Upholstery
The seat has three grades of foam and a rubber sprung pelvic support area
The seat is padded vinyl and the backrest is fabric covered
Backrest
The backrest features lateral contouring, lumbar support and manual recline using a small hand wheel located on the right side of the backrest base
There is a padded, height adjustable headrest
Powered backrest recline is optional. A push handle is integrated into the backrest of the chair
Modular or customised backrests can be added to the frame
Armrest
The armrests are padded, full length, height and width adjustable and removable as standard
They can be customised
They are removable by lifting a small lever at seat height, then lifting them out
Lift up armrests are optional
Legrests
A one piece legrest is standard
Powered elevating legrests are optional
Footplates
The standard footplate is a single footboard which is height adjustable and lifts up to fold away
Two piece, height adjustable, lift up footplates are optional
Wheels
The chair can be fitted with standard or all terrain tyres
It has alloy wheels with split rims
On the standard drive wheelchair the drive wheels are 320mm diameter and 55mm wide polyurethane
When set up for all terrain driving, the drive wheels are 355mm knobby, low pressure, pneumatic tyres
The standard and all terrain wheels are interchangeable using a jack and unscrewing the wheel nuts
Castors
The four standard front and rear castors are micro cellular polyurethane or pneumatic 200mm diameter castors
The castors for all terrain driving are 260mm diameter, 85mm wide black, pneumatic castors with tread
Controls
A range of controls are available
The standard chair is fitted with a Dynamic DX joystick controlle.
There are other options that can be fitted to this controller depending on the operators needs, including tray, chin, foot, head and attendant control
Battery
The battery boxes located under the seat can accommodate multiple sizes of batteries
A separate charger is used which plugs from the mains power into the end of the joystick control
Two 40 amp gel cell batteries are fitted as standard
High Capacity 70 Amp batteries are available on request
Motor
The motors are mounted across the frame
It has heavy duty gearboxes, high torque, high power, 4 pole motors providing 900 watts of power
A single small lever for each motor at the front of the wheelchair engages and disengages motors to allow the wheelchair to be freewheeled
Brakes
The brakes are electromagnetic
Additional manual brakes are available
Options
Positioning Options
300mm seat elevation
50° weight shift tilt in space
Power legrests
Power backrest
Anti-shear backrest
Headrests
Other Options
Bumper rails
Luggage racks
Alternative controls and mounting systems
Swing back joystick
Seat belts
Flip back armrests
Tray - clear polycarbonate or wooden
Rear carry bag
Heel loops
Calf straps or pads
Lateral trunk supports
Oxygen bottle carrier
Crutch or walking stick holder
Stump support
Dimensions
Standard
Range of Tilt In Space.......... From 0 degr to 50 degr
Height of Seat Front from Ground... 470 mm
Height of Seat Rear from Ground.... 425 mm
Height of Seat from Ground......... From 470 mm to 825 mm (range of the seat elevation if selected)
Width Overall.....................710 mm
Length Overall................... 1100 mm
Height Overall................... 1040 mm
Weight Overall................... 110 kg
Load Capacity (supplier stated).. 155 or 182 kg (lower weight range is the maximum if the seat elevation is included)
Speed (km/hr)................. From 0 km/h to 10 km/h
Battery Ampage.................40 or 70 Amps
Modular Seat
Width of Seat................. From 340 mm to 610 mm
Depth of Seat (front to back). From 350mm to 600mm, Can be customised
MPS Seat
Width of Seat................. From 410 mm to 610 mm
Depth of Seat (front to back). From 350mm to 600mm, Can be customised
Warranty
12 month limited warranty on parts and workmanship
Warranty does not cover tyres, batteries or upholstery
Licence and Insurance Requirements
Registration requirements
In NSW and the ACT, motorised wheelchairs that weigh less than 110 kg and cannot travel at more than 10 km/h do not have to be registered, provided they are being used by a person with mobility problems. A person driving a motorised wheelchair under these circumstances is defined as a pedestrian under the Australian Road Rules and is permitted to travel on a footpath or nature strip adjacent to the road.
Vehicles exempt from registration are covered by the NSW and ACT nominal defendant schemes (administered by the Motor Accidents Authority in NSW and regulated by the Department of Urban Services in the ACT) if they are at fault in an accident in NSW or the ACT on a road or road-related area and cause injury to another person. However, this cover is only valid in NSW and the ACT.
If you intend to use your motorised wheelchair in another State or Territory you should check the requirements in that jurisdiction with its road transport authority.
Maintenance
All wheelchairs require regular maintenance. Refer to User Manual for specific details.
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For a fact sheet about standards contact us or visit www.ilcaustralia.org/home/standards.asp
Place Of Manufacture
Victoria, Australia
Supplier Information - click to supplier for contacts details
MAGIC MOBILITY,
ROWVILLE, VIC
Additional /images
Click Thumbnail to view larger image.
First
Prev
Last
