NEW SEARCH NEW SEARCH, STATE - ACT
First Next Last
DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
Item Details
Elevation Ultra Lightweight Rigid Wheelchair
ILC Reference NO 43:20:5000
Item sourced from ILC ACT database
Short Description
A self propelled wheelchair with an aluminium rigid frame. It features an adjustable height and angle seat and a reclining backrest. The seat cushion support and side guards form a pocket to cradle the user in the seat which elevates using a gas strut mechanism. The adjustments are lever operated. The wheelchair is available in four seat widths. The load capacity is 100 kg.
More Details
Frame
* 7005 heat treated aluminium construction rigid frame with firm rear suspension
* Gas spring is adjusted to the user's weight
* Stability push bar behind backrest
Upholstery
* Slung, synthetic upholstery
* Foam padded backrest
* Hook and loop on seat and rear of backrest for fitting cushion and side guards
Seat
* Dynamic seat height and lowering - 254 mm (10") of infinite adjustment in
real time by squeezing a lever under the seat.
* The left lever is for reclining the rear of the seat and backrest.
* The right lever is for raising the seat
* Seat belt with buckle included
Backrest
* Dynamic backrest recline or tilt - 10 to 30 degrees of infinite adjustment by squeezing the lever on the right backrest cane
* 20cm (8") of infinite backrest height adjustability
Armrests
* No armrests
* Choice of rigid plastic or soft fabric side guards that are flexible and form fitting
Legrests
* 100 mm of infinite footrest adjustability
* Double bar foot rest support
* Calf strap is standard
Rear Wheels
* Spinergy wheels in 540 mm, 559 mm or 590 mm diameter
* Inflatable tyres
* Adjustable rear wheel camber with 0 to 10 degrees of infinite adjustment
perform with socket keys
* Move forward or back for centre of gravity adjustment
- almost 12.7cm (5") of infinite fit
- simple to perform with a single socket key
Castors
* Unitine solid tyre 100mm (4") castors
* Optional Froglegs forks and SOFTroll castors
Brakes
* Scissor lock retractable brakes
* Optional push to lock brakes
Transporting
Remove rear wheels. Frame does not fold down
Factors To Consider
* The wheelchair adjustments enable position changes during the day
* The user can reach higher levels, ATM machines etc and also transfer downwards to another surface
Wheelchair Restraints
When transporting a person in a wheelchair in a car or van, both the occupant and the wheelchair require an RTA approved restraint system. The wheelchair and the occupant need to be separately secured to the vehicle itself.
RTA approval is not required for a postural support, such as a harness, that supports the user in the wheelchair but is not part of the vehicle restraint system.
The use of a headrest is not legally required but strongly recommended. Easily detachable, folding headrests which fit a wheelchair with standard push handles are available. Refer to section Wheelchair, Scooter, Cushions, ramps / Postural Supports - Seating System: Restraint+ Head+Back+Seats
Models
One model is available
Options
Castors
* Composite Sport 10cm x 2.5cm
* Composite Softroll 10cm x 3.8cm or 12.7cm x 3.8cm
* Aluminium Sport 10cm x 2.5cm
* Aluminium Softroll 10cm x 3.8cm or 12.7cm x 3.8cm
Spinergy wheels in 540 mm, 559 mm or 590 mm diameter
Brakes
* Push to lock
* Scissor lock
Dimensions
Standard
Load Capacity (supplier stated) NSW............... 100 kg
Weight (kg) NSW................................... 11 kg
Seat Width NSW.................................... From 355 mm to 430 mm (380mm, 410mm)
Seat Depth NSW.................................... From 380 mm to 450 mm (410mm, 430mm)
Legrest Length NSW................................ Unknown
Backrest Height NSW............................... Unknown
Armrest Height (from seat)........................ Unknown
Place Of Manufacture
Canada
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For a fact sheet about standards contact us or visit www.ilcaustralia.org/home/standards.asp
Supplier Information - click to supplier for contacts details
DURABLE MEDICAL EQUIPMENT PTY LTD,
SEVEN HILLS, NSW
GDS MOBILITY,
MARSFIELD, ACT
Additional /images
No additional /images apply to this item
First
Next
Last