Product Search - Alrick Wide Series Bed

Next Last

DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.

Item Details

Alrick Wide Series Bed - 2001

ILC Reference NO 21:10:018
Item sourced from ILC ACT database

Short Description
An electrically operated, four section, adjustable wide bed suitable for home or healthcare facility use. It incorporates the following adjustments: - height, backrest angle and kneebend. The bed is available in three different widths. Suitable for bariatric users up to specified user weight capacity.

More Details
Frame
Powder coated frame.
Sheet metal platform with mattress locators positioned towards the head and foot ends of the bed.
Four corner buffers.

Headboard / Footboard
Standard 'marle beige' coloured curved style.
Queen Ann, or square styles are also available.
Marle Beige is the standard colour for head/footboards.
Any other colour or timber look including Jarrah finish is available.
Foot board folds down to become a bed end stripper board.

Electric Adjustments
Hi-low height
Backrest angle.
Knee break. (Knee break - the bed frame bends under the knee area and the foot end of bed remains lowered).

Controls
Electrically operated hand held control on a flexible cable.

Mattress
Purchase separately from supplier.

Castors
100mm diameter braking castors.
Red lever pedal brake on each castor at foot end.
Both steering castors at head end have a green lever pedal to lock into straight steering.

Power Source
Mains electricity.
Optional battery back up.

Motor
Centrally located under platform.

Factors To Consider
Most Alrick Beds have an 'arc of lift / horizontal movement' when the bed height is adjusted. The space between the wall, and the bed buffer at the head of the bed, varies (depending on the model) from 10cm at the beds lowest height to 30cm at the beds maximum height adjustment. This means that extra space lengthwise, may have to be considered when selecting the bed for small rooms.

Models
2001W Series 1070mm (King Single Bed)
2001W Series 1200mm (Three Quarter Bed)
2001W Series 1370mm (Double Bed)

Options
Clamp on handrails (High model incorporates two horizontal grab bars, Low model incorporates one horizontal grab bar)).
Bedside rails (standard with horizontal bars, or deluxe with vertical supports).
Self help pole
IV Pole
Electric vascular support (foot elevation)
Mattress
Bed extensions
Battery back up where applicable.
Bed mover wheel set - for moving beds vertically through narrow openings.

Dimensions
2001W Series 1070mm
Bed Frame Height........ From 370 mm to 700 mm
Weight of User.......... 220 kg
Length.................. 2010 mm
Overall Width........... 1070 mm
Overall Length.......... 2180 mm
Load Capacity........... 220 kg  (supplier stated)
Platform Width........... 1050 mm

2001W Series 1200mm
Bed Frame Height........ From 370 mm to 700 mm
Weight of User.......... 220 kg
Length.................. 2010 mm
Overall Width........... 1200 mm
Overall Length.......... 2180 mm
Load Capacity............ 220 kg  (supplier stated)
Platform Width.......... 1180 mm

2001W Series 1370mm
Bed Frame Height......... From 370 mm to 700 mm
Weight of User...........  220 kg
Length................... 2010 mm
Overall Width............ 1370 mm
Overall Length........... 2180 mm
Load Capacity............. 220 kg(supplier stated)
Platform Width........... 1350 mm

Place Of Manufacture
Alrick Manufacturing, New South Wales, Australia

Warranty

Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For a fact sheet about standards contact us or visit www.ilcaustralia.org/home/standards.asp

Price Guide
Refer to supplier details for pricing.

Supplier Information - click to supplier for contacts details
ACUTE HEALTHCARE ,   SEVEN HILLS, NSW
ALRICK MANUFACTURING,   LAKE CARGELLIGO, NSW
LIGHTNING MOBILITY,   QUEANBEYAN, NSW

Additional /images
No additional /images apply to this item

First   Prev Next   Last