NEW SEARCH NEW SEARCH, STATE - ACT
Next
Last
DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
Item Details
Alrick Ultra-Low Electric Adjustable Bed - 7001 Series
ILC Reference NO 21:10:011
Item sourced from ILC ACT database
Item on Display
Alrick Ultra Low Hi - Lo 7001 Adjustable Bed with Electric Backrest, Electric Knee-Break with a manual vascular support bar, Head and Foot Boards, and a Clamp-On Hand Rail (high model).
Short Description
An ultra low electrically operated adjustable bed suitable for home, nursing homes and hospital use. It incorporates the following adjustments: - height, backrest angle, and knee break. A manually operated vascular support bar enables leg/foot elevation. The bed can be lowered very close to the floor (195mm lowest height) to help prevent 'at risk' clients from falling out of bed.
Price Guide
Refer to supplier details
More Details
FRAME:
Powder coated sheet metal platform. Four corner buffers
HEADBOARD / FOOTBOARD:
Standard 'marle beige' coloured curved style. Queen Ann, or square styles are also available. Marle Beige is the standard colour for head/footboards. Any other colour or timber look including Jarrah finish is available. Foot board folds down to become a bed end stripper board.
ELECTRIC ADJUSTMENTS:
Height, backrest angle, and knee break. (Knee break - the bed frame bends under the knee area and the foot end of bed remains lowered).
MANUAL ADJUSTMENT:
Leg elevation with the vascular support bar. (The foot of the bed can be raised in a horizontal position to elevate feet).
CONTROLS:
Electrically operated hand held.
MATTRESS:
Purchase separately from supplier
CASTORS:
125mm red lever pedal brake on each castor at foot end, both steering castors at head end have a green lever pedal to lock into straight steering.
POWER SOURCE:
Mains electricity, optional battery back up.
MOTOR:
Centrally located under platform.
CUSTOMISING:
Can include increased width, strengthening frame to take up to 300kg.
Options
- Clamp on handrails (High model incorporates two horizontal grab bars, Low model incorporates one horizontal grab bar)).
- Bedside Rails (standard with horizontal bars, or deluxe with vertical supports).
- Self help pole
- IV Pole
- Electric vascular support (foot elevation)
- Mattress
- Bed extensions
- Battery back up where applicable.
- Bed mover wheel set (for moving beds vertically through narrow openings).
Dimensions
ULTRA LOW BED
Overall Width (mm) 894
Overall Length (mm) 2155
Bed Frame Height(maximum) (mm) 680
Bed Frame Height(minimum) (mm) 195
Sleeping Surface (mm) 1990 x 894
Stated Load Capacity (kg) 170kg
CLAMP ON HANDRAIL
Overall Width (mm) 300
Overall Height from top of bed frame
High Model.............................(mm) 420
Low Model..............................(mm) 250
Overall Width both models (mm) 290
Distance between horizontal bars on High Model
From Top of handrail to the middle bar.(mm) 15
From middle bar to lower bar...........(mm) 10
Caution
Most Alrick Beds have an 'arc of lift / horizontal movement' when the bed height is adjusted. The space between the wall, and the bed buffer at the head of the bed, varies (depending on the model) from 10cm at the beds lowest height to 30cm at the beds maximum height adjustment. This means that extra space lengthwise, may have to be considered when selecting the bed for small rooms.
Place Of Manufacture
Alrick Manufacturing
Lake Cargelligo. NSW (Australia)
Display Item On Loan From
Acute Healthcare
Display Information
ILCACT may have this item on display. If you want to view or trial this product, please contact ILCACT on 02-6205 1900 to ensure that it is still on display prior to your visit.
Supplier Information - click to supplier for contacts details
ACUTE HEALTHCARE ,
SEVEN HILLS, NSW
ALRICK MANUFACTURING,
LAKE CARGELLIGO, NSW
GP MEDICAL,
PHILLIP, ACT
LIGHTNING MOBILITY,
QUEANBEYAN, NSW
MOBILITY MATTERS - SOS,
FYSHWICK, ACT
Additional /images
No additional /images apply to this item
First
Prev
Next
Last
