NEW SEARCH NEW SEARCH, STATE - ACT
Next
Last
DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
Item Details
Alrick Trendelberg Series Electric Hi-Low Bed - 4000 Series
ILC Reference NO 21:10:003
Item sourced from ILC ACT database
Short Description
A mobile electrically operated bed with position adjustments to backrest, bed height, trendelenburg and reverse trendelenburg. Also available as a narrow trolley. Comes with a range of options and accessories.
More Details
FRAME
A powder coated steel frame and a sheet metal mattress base. The beds also have four corner buffs.
HEADBOARD / FOOTBOARD
A range of headboards and footboards is available.
ADJUSTMENTS
Include, backrest angle, bed height, trendelenburg and reverse trendelenburg tilt. These may all be operated independently. Optional knee break is available (4000/4).
CONTROLS
Hand held on an extendable cord.
Single control panel with flat rectangular push buttons.
Each button has a specific function for position adjustments.
MATTRESS
Various mattress options including convoluted or standard foam. Covers may include a vapour permeable, breathable, water resistant cover with two way stretch.
CASTORS
125mm solid rubber, lockable castor wheels with lever style brakes are standard.
POWER SOURCE
Is through a 240 volt power point. The power is supplied to the hand piece through a 12 volt transformer.
BED RAILS
Optional metal side rails fold down alongside the bed.
SAFETY FEATURES
Battery back up is available to enable the beds to be operated in the event of power failure.
MOTOR
Battery back up
DISMANTLING
Bed does not dismantle
Factors To Consider
Most ALRICK BEDS have an 'arc of lift / horizontal movement' when the bed height is adjusted. The space between the wall, and the bed buffer at the head of the bed, varies (depending on the model) from 10cm at the beds lowest height to 30cm at the beds maximum height adjustment. This means that extra space lengthwise, may have to be considered when selecting the bed for small rooms.
Note:
- legrest raise: leg section of bed elevates and bends at knee area and the foot end of the bed remains elevated parallel to the bed frame
- Knee break: leg section of bed elevates and bends at knee area so the legs below the knee are angled downwards (triangular configuration)
- Trendelenburg Tilt: allows the entire bed to tilt so a person's feet can be higher than their head. Reverse Trendelenburg tilts the bed in the opposite direction.
Models
4000 Series
- Standard model with optional electric knee break
- Sheet metal mattress base
- Standard 125mm castors
Narrow trolley suitable for patient transfer
Options
- electric knee break adjustment
- manual or electric leg raise adjustment
- twin wheel or single precision bearing wheel castors
- narrow trolley model (suitable for healthcare facility transfers)
- self help pole
- IV pole
- bed length clip on or pull out extensions
- standard rails
- deluxe rails
- range of head and foot boards
- bed mover wheel set (for moving beds vertically through doorways)
- 150mm, 200mm castors
- range of mattresses
Dimensions
SERIES 4000 MODEL
Overall length................2230 (mm)
Overall width.................960 (mm)
Bed frame height (maximum)....750 (mm)
Bed frame height (minimum)....420 (mm)
Sleeping surface..............2025 x 870 (mm)
Trendelenburg tilt angle......-12 to 12 degrees
Stated load capacity..........200 (kg)
Under bed clearance...........unavailable
Place Of Manufacture
Alrick Manufacturing (NSW) Australia
Warranty
One year warranty
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information on what standards the equipment may need to meet, see http:// www.ilcaustralia.org.au/home/standards.asp
Price Guide
Refer to supplier details
Supplier Information - click to supplier for contacts details
ACUTE HEALTHCARE ,
SEVEN HILLS, NSW
ALRICK MANUFACTURING,
LAKE CARGELLIGO, NSW
GP MEDICAL,
PHILLIP, ACT
LIGHTNING MOBILITY,
QUEANBEYAN, NSW
MOBILITY MATTERS - SOS,
FYSHWICK, ACT
Additional /images
No additional /images apply to this item
First
Prev
Next
Last
