Product Search - Crystal Bed Pads

Next Last

DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.

Item Details

Crystal Bed Pads

ILC Reference NO 13:35:007
Item sourced from ILC ACT database

Item on Display
1 x BOSs40 Bed Pad
1 x BOSs30 Bed Pad
1 x SC620 Jewelee Bed Pad.(previously known as the D50)

Search Words (Silent)
Crystal

Short Description
A range of reusable, absorbent bedpads made from quilted polyester. They are available with or without tuck-in flaps, and with or without a waterproof backing. They are designed to assist in the management of incontinence, and are suitable for use with adults and children.

Price Guide
Refer to supplier details for pricing.

More Details
The bed pads are made from a stay dry surface layer and an absorbent layer. Tuck-in flaps are made from polycotton and the waterproof material is a reinforced slip resistant vintex. The waterproof backing is unstitched at the sides to allow for quicker drying after washing, and for easy viewing of the "Time-To-Change" identifying line.

Crystal bed pads incorporate a "Time to Change" line (a red line of stitching approximately three and half inches in from the side opening on the underside of the white absorbent layer). This line gives a visual prompt as to when it is necessary to change the bed pad.

The surface layer is a blue coloured, quilted, brushed polyester fabric. When a person voids, the urine rapidly passes through the polyester and is absorbed and dispersed by the rayon fabric beneath. Within a few minutes any moisture remaining on the brushed polyester surface is evaporated by body heat, and the person again lies on a comfortable dry surface.

These absorbent bed pads help to reduce the frequency of changes required. In most cases a person should be comfortably dry after a full night's sleep with no sheet changes. (However if a person is being nursed with a turning routine this should be continued).

All bed pads should be washed before use to activate the absorbent fibres.
DO NOT USE BLEACHES OR FABRIC SOFTENERS.

Method Of Use
Place waterproof backed bed pads directly on top of bottom sheet and tuck in side flaps if they exist. For the bed pads that do not have a waterproof backing, it will be necessary to place a waterproof drawsheet
directly on the bottom sheet then place the bed pad on top of it. For maximum benefit the person's skin should be in direct contact with the blue surface layer.

Models
BOSs 40 Waterproof Backed, Open Sided Bed Pad with tuck-in flaps.

BOSs 30 Waterproof Backed, Open Sided Bed Pad without tuck-in flaps.

SC620 JEWELEE BED PAD with tuck-in flaps and without waterproof backing.

CHC10102 JEWELEXE BED PAD with tuck-in flaps and without waterproof backing.

Dimensions
BOSs 30,40, and SC620 BED PADS
Overall Width            (mm)    900
Overall Length           (mm)    1000
Capacity                 (ml)    2500

JEWELEXE BED PAD CHC10102
Width                    (mm)    870
Length                   (mm)    1000
Capacity                 (ml)    1400

Cleaning Requirements
- Wash bed pad before use to activate the absorbent fibres.
- Rinse bed pad in cold water prior to machine washing. Machine wash on normal settings with mild detergent (eg. Softly) and warm water.
- DO NOT USE BLEACHES OR FABRIC SOFTENERS.
- Line dry or tumble dry on warm cycle only (do not exceed 60
degrees Centigrade).
- Do not iron.
- Do not dry clean.
- Do not exposed to direct heat.

Place Of Manufacture
CRYSTAL HEALTHCARE (VIC)
Australian Made

Display Item On Loan From
Sanicare Pty Ltd

Display Information
ILCACT may have this item on display. If you want to view or trial this product, please contact ILCACT on 02-6205 1900 to ensure that it is still on display prior to your visit.

Supplier Information - click to supplier for contacts details
BRIGHTSKY AUSTRALIA,   NEWINGTON, NSW
BUNZL (WAS SANICARE),   CHULLORA, NSW
CRYSTAL HEALTHCARE PTY LTD,   CAMPBELLFIELD, VIC
INDEPENDENCE AUSTRALIA - NSW,   AUBURN, NSW
INDEPENDENCE AUSTRALIA - VIC,   COLLINGWOOD, VIC

Additional /images

Click Thumbnail to view larger image.

First   Prev Next   Last