Independent Living Centres Australia Inc
infoline: 1300 885 886
web: www.ilcaustralia.org
DISCLAIMER:
The Independent Living Centres Australia Inc does
not sell this equipment, but provides this information as a community service.
Details and prices are provided by the equipment supplier and are subject to
change without notice. The provision of this information does not constitute
a recommendation. Responsibility for final selection of any item rests with
the individual.
Alrick Ultra Low Electric Bed 7500 Series
ILC Reference NO 21:10:082
Item sourced from ILC VIC database
Factors to Consider
Most Alrick Beds have an 'arc of lift / horizontal movement' when the bed height is adjusted. The space between the wall, and the bed buffer at the head of the bed, varies (depending on the model) from 10cm at the beds lowest height to 30cm at the beds maximum height adjustment. This means that extra space lengthwise, may have to be considered when selecting the bed for small rooms.
Short Description
An ultra low, electrically operated, two section, adjustable bed suitable for home or healthcare facility use. It incorporates the following adjustments: - height and backrest angle. The bed can be lowered very close to the floor (195mm lowest height) to help prevent 'at risk' users from falling out of bed. Suitable for bariatric users up to specified user weight capacity.
Price Guide
Refer to supplier details for pricing.
More Details
Frame
Powder coated frame
Sheet metal platform with mattress locators on the head section of the platform.
Four corner buffers.
Headboard / Footboard
Standard 'marle beige' coloured curved style.
Queen Ann, or square styles are also available.
Marle Beige is the standard colour for head/footboards.
Any other colour or timber look including Jarrah finish is available.
Foot board folds down to become a bed end stripper board.
Electric Adjustments
Hi-low height
Backrest angle.
Controls
Electrically operated hand held control on a flexible cable.
Mattress
Purchase separately from supplier.
Castors
100mm diameter braking castors.
Red lever pedal brake on each castor at foot end.
Both steering castors at head end have a green lever pedal to lock into straight steering.
Power Source
Mains electricity.
Optional battery back up.
Motor
Centrally located under platform.
Customising
Can include increased width, strengthening frame to take up to 300kg.
Models
Alrick 7500 Series Bed
Options
Clamp on handrails (High model incorporates two horizontal grab bars, Low model incorporates one horizontal grab bar)).
Bedside rails (standard with horizontal bars, or deluxe with vertical supports).
Self help pole
IV Pole
Mattress
Bed extensions
Battery back up where applicable.
Bed mover wheel set (for moving beds vertically through narrow openings).
Dimensions
Alrick 7500 Series Bed
Bed Frame Height.................................. From 195 mm to 680 mm
Weight of User.................................... 170 kg
Length............................................ 1990 mm
Overall Width..................................... 894 mm
Overall Length.................................... 2155 mm
Castor Diameter................................... 100 mm
Load Capacity (supplier stated)................... 170 kg
Platform Width.................................... 894 mm
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information on what standards the equipment may need to meet, see www.ilcaustralia.org/explanationofstandards.
Place Of Manufacture
Alrick Manufacturing, NSW (Australia)
Supplier Information
Name: Alrick Manufacturing
Price: POA
Address:
116 -120 Canada St
Lake Cargellio
NSW 2672
Postal Address:
PO Box 63
Lake Cargellio
NSW 2672
Phone: (02) 6898 1700
FAX: (02) 6898 2144
Website: http://
Name: Iona Australian Medical Products
Price: POA
Address:
Unit 6,
6-8 Eastspur Court
Kilsyth
VIC 3137
Phone: (03) 9761 4617
FAX: (03) 9761 4618
Email: billn@ionamedical.com.au
Website: www.ionamedical.com.au
Additional Images
No additional Images apply to this item