Independent Living Centres Australia Inc
infoline: 1300 885 886
web: www.ilcaustralia.org

DISCLAIMER:
The Independent Living Centres Australia Inc does not sell this equipment, but provides this information as a community service. Details and prices are provided by the equipment supplier and are subject to change without notice. The provision of this information does not constitute a recommendation. Responsibility for final selection of any item rests with the individual.

Alrick 2001 Series Wide Beds

ILC Reference NO 21:10:083
Item sourced from ILC VIC database

Alrick 2001 Series Wide Beds

Factors to Consider
Most Alrick Beds have an 'arc of lift / horizontal movement' when the bed height is adjusted. The space between the wall, and the bed buffer at the head of the bed, varies (depending on the model) from 10cm at the beds lowest height to 30cm at the beds maximum height adjustment. This means that extra space lengthwise, may have to be considered when selecting the bed for small rooms.

Short Description
An electrically operated, four section, adjustable wide bed suitable for home or healthcare facility use. It incorporates the following adjustments: - height, backrest angle and kneebend. The bed is available in three different widths. Suitable for bariatric users up to specified user weight capacity.

Price Guide
Refer to supplier details for pricing.

More Details
Sizes
The bed is available in the following widths:
1070mm
1200mm
1370mm

Frame
Powder coated frame.
Sheet metal platform with mattress locators positioned towards the head and foot ends of the bed.
Four corner buffers.

Headboard / Footboard
Standard 'marle beige' coloured curved style.
Queen Ann, or square styles are also available.
Marle Beige is the standard colour for head/footboards.
Any other colour or timber look including Jarrah finish is available.
Foot board folds down to become a bed end stripper board.

Electric Adjustments
Hi-low height
Backrest angle.
Knee break. (Knee break - the bed frame bends under the knee area and the foot end of bed remains lowered).

Controls
Electrically operated hand held control on a flexible cable.

Mattress
Purchase separately from supplier.

Castors
100mm diameter braking castors.
Red lever pedal brake on each castor at foot end.
Both steering castors at head end have a green lever pedal to lock into straight steering.

Power Source
Mains electricity.
Optional battery back up.

Motor
Centrally located under platform.

Models
2001W Series 1070mm
2001W Series 1200mm
2001W Series 1370mm

Options
Clamp on handrails (High model incorporates two horizontal grab bars, Low model incorporates one horizontal grab bar)).
Bedside rails (standard with horizontal bars, or deluxe with vertical supports).
Self help pole
IV Pole
Electric vascular support (foot elevation)
Mattress
Bed extensions
Battery back up where applicable.
Bed mover wheel set (for moving beds vertically through narrow openings).

Dimensions
2001W Series 1070mm
Bed Frame Height.................................. From 370 mm to 700 mm
Weight of User.................................... 220 kg
Length............................................ 2010 mm
Overall Width..................................... 1070 mm
Overall Length.................................... 2180 mm
Load Capacity (supplier stated)................... 220 kg
Platform Width.................................... 1050 mm

2001W Series 1200mm
Bed Frame Height.................................. From 370 mm to 700 mm
Weight of User.................................... 220 kg
Length............................................ 2010 mm
Overall Width..................................... 1200 mm
Overall Length.................................... 2180 mm
Load Capacity (supplier stated)................... 220 kg
Platform Width.................................... 1180 mm

2001W Series 1370mm
Bed Frame Height.................................. From 370 mm to 700 mm
Weight of User.................................... 220 kg
Length............................................ 2010 mm
Overall Width..................................... 1370 mm
Overall Length.................................... 2180 mm
Load Capacity (supplier stated)................... 220 kg
Platform Width.................................... 1350 mm

Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.

Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information on what standards the equipment may need to meet, see www.ilcaustralia.org/explanationofstandards.



Place Of Manufacture
Alrick Manufacturing, NSW (Australia)



Supplier Information
Name:  Access Rehabilitation Equipment
Address:
  17-19 Bond St
  Sale
  VIC  3850
Postal Address:
  PO Box 1376
  Sale
  VIC  3850
Phone:   1300 723 830
FAX:  1300 723 831
Email:   sales@rehabquip.com
Notes:
  Also agents for Linds Rehabiliation.

Name:  Alrick Manufacturing
Price:  POA
Address:
  116 -120 Canada St
  Lake Cargellio
  NSW  2672
Postal Address:
  PO Box 63
  Lake Cargellio
  NSW  2672
Phone:   (02) 6898 1700
FAX:  (02) 6898 2144
Website:  http://

Name:  Iona Australian Medical Products
Price:  POA
Address:
  Unit 6,
  6-8 Eastspur Court
  Kilsyth
  VIC  3137
Phone:   (03) 9761 4617
FAX:  (03) 9761 4618
Email:   billn@ionamedical.com.au
Website:  www.ionamedical.com.au


Additional Images
No additional Images apply to this item